loading
ISUZU ISD-F01-500 - Retaining rings
July 1, 2018 - ISUZU

This standard covers the retaining rings (hereinafter referred to as "rings"), mainly for automotive uses.

ASME B107.19 - Pliers, Retaining Ring
January 1, 2004 - ASME

This Standard provides performance and safety requirements for pliers suitable for inserting and removing internal and external retaining rings including those covered by ASME B18.27. Inclusion of dimensional data in this Standard does not mean that all pliers described herein are...

JIS B 2804 - RETAINING RINGS
JSA
A description is not available for this item.
DIN LN 471 - Aerospace; retaining rings for shafts
May 1, 1989 - DIN

Field of aapplication Retaining rings to this Standard are securing elements allowed for use on bolts, shafts, ball bearing assemblies and other rotating parts under the following condition; They shall only be installed in locations protected from the exterior, if possible on all...

DIN LN 472 - Aerospace; retaining rings for bores
May 1, 1989 - DIN

Retaining rings to this Standard are securing elements allowed for use on bolts, shafts, ball bearing assemblies and other rotating parts under the following condition; They shall only be installed in locations protected from the exterior, if possible on all sides. They shall not...

DIN 983 - Retaining rings with lugs for shafts
April 1, 2011 - DIN

This standard applies to retaining rings with lugs for use on shafts. Such retaining rings are suitable for securing machine components which have non-square (radiused or chamfered) edges, and for concealed assembly as illustrated in Figure 9. They have an eccentric form...

AS4573-3 - AS4573 Steel Retaining Ring
September 5, 1955 - SAE Industry Technologies Consortia

No scope available.

AS4575-2 - AS4575 Nylon Retaining Ring
September 5, 1955 - SAE Industry Technologies Consortia

No scope available.

AS3178-1 - AS3178 Retaining Ring
November 16, 1949 - SAE Industry Technologies Consortia

No scope available.

ANSI B107.19 - PLIERS, RETAINING RING
ASME
A description is not available for this item.
GGG-P-480 - PLIERS, RETAINING RING
NPFC
A description is not available for this item.
AMS7330A - RETAINING RINGS, STEEL, CORROSION RESISTANT Spiral Wound
January 1, 1986 - SAE International

This specification covers uniform-cross-section, spiral retaining rings made of corrosion-resistant steel.

AMS7330 - RETAINING RINGS, STEEL, CORROSION RESISTANT Spiral Wound
December 1, 1974 - SAE International

This specification covers uniform-cross-section, spiral retaining rings made of corrosion-resistant steel.

AS4570-4 - AS4570 Retaining Rings
December 4, 2015 - SAE Industry Technologies Consortia

No scope available.

JIS B 2805 - Retaining Rings-E Type
March 1, 1978 - JSA
A description is not available for this item.
KS B 1336 - RETAINING RINGS (C TYPE)
KSA
A description is not available for this item.
KS B 1337 - RETAINING RINGS (E TYPE)
KSA
A description is not available for this item.
DIN 472 - Retaining rings for bores - Normal type and heavy type
June 1, 2017 - DIN

This standard specifies requirements for retaining rings for bores and lays down design details for the grooves into which such rings are fitted. NOTE Retaining rings are used to hold components or assemblies (e.g. rolling bearings) in bores and are suitable for...

DIN 984 - Retaining rings with lugs (internal circlips) for use in bores
April 1, 2013 - DIN

This standard applies to retaining rings with lugs for use in bores. Retaining rings are suitable for retaining machine components which have non-square (radiused or chamfered) edges. They have an eccentric form and have a number of lugs of equal depth uniformly...

DIN 471 - Retaining rings for shafts - Normal type and heavy type
April 1, 2011 - DIN

This standard specifies requirements for retaining rings for shafts and lays down design details for the grooves into which such rings are fitted. NOTE Retaining rings are used to hold components or assemblies (e.g. rolling bearings) on shafts and are suitable for...

Advertisement