loading
ASTM D1079-26b - Standard Terminology Relating to Roofing and Waterproofing
May 1, 2026 - ASTM International

1.1 This terminology consists of terms and definitions pertaining to the subject field of roofing and waterproofing, and in particular, terms related to standards generated by ASTM Committee D08 on Roofing and Waterproofing. 1.2 The purpose of this terminology is to provide preferred...

ASTM D1079-26a - Standard Terminology Relating to Roofing and Waterproofing
March 1, 2026 - ASTM International

1.1 This terminology consists of terms and definitions pertaining to the subject field of roofing and waterproofing, and in particular, terms related to standards generated by ASTM Committee D08 on Roofing and Waterproofing. 1.2 The purpose of this terminology is to provide preferred...

ASTM D6878/D6878M-26 - Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing
May 1, 2026 - ASTM International

This specification covers flexible sheet made from thermoplastic polyolefin (TPO) as the principal polymer, intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fabrics or scrims. The sheet shall be formulated from ethylene and higher...

ASTM D7897-26 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
July 1, 2026 - ASTM International

5.1 The solar reflectance of a building envelope surface affects surface temperature and near-surface ambient air temperature. Surfaces with low solar reflectance absorb a high fraction of the incoming solar energy. Sunlight absorbed by a roof or by other building envelope surfaces can be conducted...

ASTM D7119/D7119M-21(2026) - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
May 1, 2026 - ASTM International

1.1 This guide covers the removal of test specimens from spray polyurethane foam (SPF) roofing systems in the field for the purpose of examination of an existing system and/or quality assurance for new installations. It describes the types and purposes of sample cuts, visual inspection...

ASTM D8650/D8650M-26 - Standard Test Method for Determining Low-Temperature Flexibility of Liquid-Applied Polymeric Membranes Used in Roofing and Waterproofing
May 1, 2026 - ASTM International

1.1 This test method covers the determination of low-temperature flexibility of liquid-applied membranes used in roofing and waterproofing. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be...

ASTM C120/C120M-26 - Standard Test Methods for Flexure Testing of Structural and Roofing Slate
March 15, 2026 - ASTM International

1.1 These test methods cover determination of the breaking load of roofing slate and modulus of rupture of structural slate by use of simple three-point loading. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each...

ASTM D6164/D6164M-26 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
July 1, 2026 - ASTM International

This specification covers Grades G (granule surfaced) and S (smooth surfaced) prefabricated bituminous sheet materials reinforced with polyester fabric and modified by styrene butadiene styrene (SBS) thermoplastic elastomer, intended for use in the fabrication of multiple ply roofing and...

ASTM E2128-26 - Standard Guide for Evaluating Water Leakage of Building Walls
July 1, 2026 - ASTM International

4.1 This guide is intended to provide building professionals with a comprehensive methodology for evaluating water leakage through walls. It addresses the performance expectations and service history of a wall, the various components of a wall, and the interaction between these components and...

ASTM D8508/D8508M-25 - Standard Guide for Evaluating the Surface of Structural Concrete Roof Decks to Receive Adhered Roofing Systems
December 15, 2025 - ASTM International

4.1 This guide discusses various methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials. 4.2 Methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials included as part of a...

ASTM D1079-26 - Standard Terminology Relating to Roofing and Waterproofing
February 1, 2026 - ASTM International
A description is not available for this item.
ASTM D8667-26 - Standard Test Method for Determining Intermediate and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR)
May 1, 2026 - ASTM International

1.1 This test method covers the determination of parameters calculated from the measurement of modulus (G*) and phase angle (d) of asphalt binders when tested in dynamic (oscillatory) shear using parallel plate geometry in accordance with Test Method D7175. These parameters are considered important...

ASTM D7694/D7694M-18(2026) - Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
May 1, 2026 - ASTM International

1.1 These test methods cover test procedures for prefabricated, reinforced, self-adhesive (SA) polymer-modified bituminous sheet materials designed for single- or multiple-ply application in roofing and waterproofing membranes. 1.2 These test methods specifically address the self-adhesive...

ASTM E907-25 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
December 15, 2025 - ASTM International

4.1 This field test method is suitable for determining the uplift resistance of the roofing system as stated in applicable specifications, bid documents, or where required by other authorities having jurisdiction. This field test method is also intended to supplement measurement of the...

ASTM D8518-25 - Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
December 1, 2025 - ASTM International

4.1 Establishing standard practices and recommended procedures is a critical step required to achieve quality roofing and waterproofing system installations. This guide describes preparing typical substrates to receive hot-applied rubberized asphalt (HRA), melting and application of HRA,...

ASTM D7851-25 - Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
September 1, 2025 - ASTM International

1.1 This guide provides guidance and considerations related to designing sustainable low-sloped roofing systems, including exposed membrane roofs, membranes covered with landscaped and vegetative (green) overburden systems, ballasted roofs, and protected membrane roofing assemblies. A...

ASTM D6694/D6694M-25 - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
December 1, 2025 - ASTM International

This specification covers a liquid-applied solvent dispersed elastomeric coating used as a roofing membrane for spray polyurethane foam (SPF) insulation whose principal polymer in the dispersion contains more than 95 % silicone. The product, as manufactured, shall be in liquid form for...

Advertisement