loading
ASTM D2859-16(2021) - Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
March 15, 2021 - ASTM International

1.1 This fire-test-response standard describes a test method for the determination of the flammability of finished textile floor covering materials when exposed to an ignition source under controlled laboratory conditions. 1.1.1 Carpets and rugs offered for sale in the United States are...

ASTM C171 - Standard Specification for Sheet Materials for Curing Concrete
November 1, 2020 - ASTM

This specification covers materials in sheet form used for covering the surfaces of hydraulic cement concrete to inhibit moisture loss during the curing period and, in the case of the white reflective type materials, to also reduce temperature rise in concrete exposed to radiation from the sun. The...

ASTM C171-20 - Standard Specification for Sheet Materials for Curing Concrete
November 1, 2020 - ASTM International

1.1 This specification covers materials in sheet form used for covering the surfaces of hydraulic cement concrete to inhibit moisture loss during the curing period and, in the case of the white reflective type materials, to also reduce temperature rise in concrete exposed to radiation from the sun....

ULC 561 - Standard for Installation and Services for Fire Signal Receiving Centres and Systems
June 1, 2020 - ULSE

1.1 These requirements cover electrically powered floor-finishing machines to be used in accordance with the National Electrical Code, NFPA 70. This product category includes the following: a floor polisher, floor scrubber, floor sander, floor scraper, tile remover, rug shampooer, rug...

DS/EN 15398 - Resilient, textile, laminate and modular mechanical locked floor coverings (MMF) – Floor covering standard symbols
March 31, 2020 - DS

This document establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols: - resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; - textile floor coverings, including...

ASTM D3676-18 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
August 1, 2018 - ASTM International

1.1 This specification covers high-density cellular rubber adhered to carpet and rugs. This specification can also be applied to various substrates, such as blown sponge rubber, used independently as carpet underlay. 1.2 This standard does not purport to address all of the safety concerns,...

DIN EN 14215 - Textile floor coverings - Classification of machine-made rugs and runners
December 1, 2018 - DIN

This European Standard specifies requirements for machine-made (woven, tufted, knitted, needled, flocked, bonded, hand-tufted) rugs and runners, including a classification according to use intensity and luxury. This European Standard is not applicable to hand-knotted rugs, to barrier...

ASTM D3676 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
August 1, 2018 - ASTM

This specification covers high-density cellular rubber adhered to carpet and rugs. This specification can also be applied to various substrates, such as blown sponge rubber, used independently as carpet underlay. This standard does not purport to address all of the safety concerns, if any,...

DS/EN 1307 - Textile floor coverings – Classification
December 10, 2018 - DS

This European Standard specifies the requirements for classification of all textile floor coverings and carpet tiles, excluding rugs and runners (see ISO 2424) into use classes with regard to one or more of the following properties: wear, appearance retention, additional performance...

ASTM D6119 - Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
July 1, 2019 - ASTM

This practice covers the trafficking of pile yarn floor coverings in a laboratory in order to effect a change in surface appearance as a result of exposure to foot traffic under controlled conditions. A separate test method, D7330, covers the assessment of surface appearance change using the Carpet...

ASTM D6119-19 - Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
July 1, 2019 - ASTM International

1.1 This practice covers the trafficking of pile yarn floor coverings in a laboratory in order to effect a change in surface appearance as a result of exposure to foot traffic under controlled conditions. A separate test method, D7330, covers the assessment of surface appearance change using the...

CIE 232 - Discomfort Caused by Glare from Luminaires with a Non-Uniform Source Luminance
January 1, 2019 - CIE

Introduction and scope Discomfort glare is an aspect of visual comfort that is relevant for determining the quality of a lighting system. It is the type of glare that occurs when people complain about visual discomfort from bright light sources, even when the brightness is not impairing vision. In...

DIN EN 14041 - Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
May 1, 2018 - DIN

This European Standard specifies the essential characteristics for the following types of floor coverings: - resilient floor coverings, excluding loose-laid mats; - textile floor coverings, excluding loose-laid (barrier) mats, runners and rugs; - laminate floor coverings; - modular...

DS/EN 14041 - Resilient, textile, laminate and modular multilayer floor coverings – Essential characteristics
January 22, 2018 - DS

This European Standard specifies the essential characteristics for the following types of floor coverings: - resilient floor coverings, excluding loose-laid mats; - textile floor coverings, excluding loose-laid (barrier) mats, runners and rugs; - laminate floor coverings; - modular...

BS EN 14215 - Textile floor coverings - Classification of machine-made rugs and runners
October 31, 2018 - BSI
A description is not available for this item.
DIN EN 16810 - Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
August 1, 2017 - DIN

This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings. This standard applies to the following types of floor coverings: - resilient floor coverings manufactured from plastics, linoleum,...

DS/EN 16810 - Resilient, textile and laminate floor coverings – Environmental product declarations – Product category rules
May 22, 2017 - DS

This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings. This standard applies to the following types of floor coverings: - resilient floor coverings manufactured from plastics, linoleum,...

UL 1017 - Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines
September 15, 2017 - ULSE

1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, floor sweepers, and to household use floor finishing machines to be employed in accordance with C22.1, C22.2 No. 0, and ANSI/NFPA 70. 1.2 These requirements cover: a) Household, commercial, and coin-operated vacuum...

ASTM D2859-16 - Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
June 1, 2016 - ASTM International

1.1 This fire-test-response standard describes a test method for the determination of the flammability of finished textile floor covering materials when exposed to an ignition source under controlled laboratory conditions. 1.1.1 Carpets and rugs offered for sale in the United States are...

Advertisement