loading
ISA SAFETY PROFILES FOR R - Safety Profiles for Real-Time Ethernet-Based Industrial Automation Networks
January 1, 2009 - ISA

Part of the ISA/O3neida series, this book discusses network systems in industrial automation and their features related to real-time and functional safety requirements. The basics of standard Ethernet are introduced, specifying the Open System Interconnection (OSI) reference model layers and...

API SAFETY & FIRE BINDER - SAFETY AND FIRE PROTECTION BINDER
API
A description is not available for this item.
NEMA SAFETY GUIDE - SAFETY GUIDE FOR USE OF EXTENSION CORDS
NEMA
A description is not available for this item.
SWRI SAFETY & HEALTH - Safety & Health Field Manual
SWRI
A description is not available for this item.
ISA SAFETY INSTRUMENTED S - SAFETY INSTRUMENTED SYSTEMS: A LIFE-CYCLE APPROACH
ISA
A description is not available for this item.
AS8007 - Minimum Safe Performance Over Speed Warning Instruments
June 19, 2023 - SAE International

This AS defines instruments which use inputs of static and pitot pressure equal to those which are utilized to establish the pressure altitude and speed of that aircraft. These pressures are applied to the instrument ports to provide means for generation of an aural warning whenever the aircraft...

ASTM D1993-22(2026) - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
July 1, 2026 - ASTM International

1.1 This test method covers a procedure which is used to measure the surface area of precipitated hydrated silicas by the conventional Brunauer, Emmett, and Teller (BET) theory of multilayer gas adsorption behavior using multipoint determinations, similar to that used for carbon black in Test...

ASTM F2388-21(2026) - Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing products including changing tables, changing table accessories, contoured changing pads, and add-on changing units. 1.2 This specification...

ASTM E2550-26 - Standard Test Method for Thermal Stability by Thermogravimetry
July 1, 2026 - ASTM International

1.1 This test method describes the assessment of material thermal stability through the determination of the temperature at which the materials start to decompose or react and the extent of the mass change using thermogravimetry. The test method uses minimum quantities of material and is...

ASTM F3035-26 - Standard Practice for Production Acceptance in the Manufacture of a Light Sport Aircraft
May 1, 2026 - ASTM International

4.1 The purpose of this practice is to provide the minimum requirements necessary for the establishment of a production acceptance program for a manufacturer of light sport aircraft. 4.2 The purpose of this practice is to provide the minimum requirements for the establishment of a...

ASTM F3813-26 - Standard Specification for Light Sport Category Aircraft Occupant Safety
May 1, 2026 - ASTM International

1.1 This specification covers the requirements for light sport aircraft related to occupant safety as required by reference from integration standards. This specification covers areas such as external inertial loads, visibility, emergency evacuation, baggage restraint, occupant restraints (seat...

ASTM F3834-26 - Standard Specification for Systems and Equipment for Light Sport Category Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers the minimum requirements for systems and equipment fitted to light sport category aircraft. This includes but is not limited to those items necessary for safe operation for all phases of flight as described in the Pilot's Operating Handbook (POH). The...

ASTM F3825-26 - Standard Specification for Operating Limitations, Markings, Placards, and Warnings for Light Sport Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers the requirement for operating limitations, markings, placards, and warnings for light sport aircraft. This includes those items necessary for safe operation and occupant warnings. It also defines the minimum requirements for legibility and consistency of...

ASTM E2271/E2271M-26 - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
April 1, 2026 - ASTM International

4.1 A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in multifamily dwellings having similar units, common areas or exterior sites is performed to determine that the clearance area is...

ASTM F2573-06(2026) - Standard Specification for Low Velocity Resilient Material Projectile
May 1, 2026 - ASTM International

This specification covers critical characteristics of low velocity resilient material projectiles made from a resilient material. Material diameter, shape, projectile hardness, and weight shall conform to the dimensions indicated in this specification. This specification establishes minimum...

ASTM A210/A210M-26 - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
April 1, 2026 - ASTM International

1.1 This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including safe ends (see Note 1), arch and stay tubes, and superheater tubes. Note 1: This type is not suitable for safe ending by forge welding. 1.2 The tubing...

ASTM E2996-20(2026) - Standard Guide for Workforce Education in Nanotechnology Health and Safety
June 1, 2026 - ASTM International

1.1 This guide provides a framework for basic workforce education in health and safety topics related to nanotechnology, to be taught at an undergraduate college level. This education should be broad to prepare an individual to work safely within one of the many areas in nanotechnology...

Advertisement