loading
ISA CALIBRATION: A TECHNI - Calibration: A Technician's Guide
January 1, 2005 - ISA

This comprehensive review of calibration provides an excellent foundation for understanding principles and applications of the most frequently performed tasks of a technician. Topics addressed include terminology, bench vs. field calibration, loop vs. individual instrument...

ASTM E2040-25 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
July 1, 2025 - ASTM International

1.1 This test method describes the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 The SI units are the standard. No other units of measurement are included in this...

ASTM E2040 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
December 1, 2019 - ASTM

This test method describes the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. The values stated in SI units are to be regarded as standard. No other units of measurement...

ASTM E2040-19 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
December 1, 2019 - ASTM International

1.1 This test method describes the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 The values stated in SI units are to be regarded as standard. No other units of...

ASTM E2040-08(2014) - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
March 15, 2014 - ASTM International

1.1 This test method describes the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 The values stated in SI units are to be regarded as standard. No other units of...

ASTM E2108-25 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
April 1, 2025 - ASTM International

1.1 This practice describes a procedure for calibrating the electron binding-energy (BE) scale of an X-ray photoelectron spectrometer that is to be used for performing spectroscopic analysis of photoelectrons excited by unmonochromated aluminum or magnesium Ka X-rays or by monochromated...

ASTM E74-18(2026) - Standard Practices for Calibration and Verification for Force-Measuring Instruments
April 1, 2026 - ASTM International

1.1 The purpose of these practices is to specify procedures for the calibration of force-measuring instruments. Procedures are included for the following types of instruments: 1.1.1 Elastic force-measuring instruments, and 1.1.2 Force-multiplying systems, such as balances and small platform...

ASTM E2040-08 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
September 1, 2008 - ASTM International

1.1 This test method describes the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 The values stated in SI units are to be regarded as standard. No other units of...

ASTM E3301-26 - Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
July 1, 2026 - ASTM International

1.1 This test method describes the temperature calibration of a dynamic mechanical analyzer using thermal lag over the temperature range of -100 °C to 300 °C. 1.2 This standard may be compared to Test Methods E1867. 1.3 The values stated in SI units are to be regarded as standard. No other...

ASTM E2551-25 - Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
December 1, 2025 - ASTM International

1.1 These test methods describe the humidity calibration (or conformance) of humidity generators for use with thermogravimetric analyzers and other thermal analysis apparatus. The humidity range covered is 5 % relative humidity (% RH) to 95?% RH and the temperature range is 0 °C to 80 °C. 1...

ASTM E2040-03 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
September 10, 2003 - ASTM International

1.1 This test method covers the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 Electronic instrumentation or automated data analysis and reduction systems or...

ASTM A388/A388M-26 - Standard Practice for Ultrasonic Examination of Steel Forgings
April 1, 2026 - ASTM International

This practice covers the examination procedures for the contact, pulse-echo ultrasonic examination of heavy steel forgings by the straight and angle-beam techniques. An ultrasonic, pulsed, reflection type of instrument shall be used and shall provide linear presentation for at least 75% of the...

ASTM E1582-25 - Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
September 1, 2025 - ASTM International

1.1 This test method describes the temperature calibration of thermogravimetric analyzers over the temperature range from 25 °C to 1500 °C and is applicable to commercial and custom-built apparatus. This calibration may be accomplished by the use of either melting point standards or...

ASTM E2040-99 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
September 10, 1999 - ASTM International

1.1 This test method covers the calibration or performance confirmation of the mass (or weight) scale of thermogravimetric analyzers and is applicable to commercial and custom-built apparatus. 1.2 Electronic instrumentation or automated data analysis and reduction systems or...

ASTM E2624-17(2025) - Standard Practice for Torque Calibration of Testing Machines
October 1, 2025 - ASTM International

1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing...

ASTM E2995-15a(2025) - Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
May 15, 2025 - ASTM International

This specification is applicable to glass thermohydrometers of various scale graduation systems, intended for use in a variety of ASTM Test Methods. The thermohydrometers covered by this specification have larger maximum permissible scale errors than do their Hg-filled counterparts....

ASTM D1686-25 - Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
December 1, 2025 - ASTM International

1.1 This test method covers the visual measurement of the color of thermally stable solids melting below 150?°C of aromatic hydrocarbons, their derivatives, and related chemicals. 1.2 It is applicable only to materials in which the color-producing bodies present have light absorption...

ASTM D6822-25 - Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
December 1, 2025 - ASTM International

5.1 Accurate determination of the density, relative density, or API gravity of petroleum and its products is necessary for the conversion of measured volumes to volumes or masses, or both, at the standard reference temperatures of 15?°C or (60?°F) during custody transfer. 5.2 This procedure is most...

ASTM E1867-25 - Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
September 1, 2025 - ASTM International

1.1 These test methods describe the temperature calibration of dynamic mechanical analyzers (DMA) from -100?°C to 300?°C. 1.2 SI units are the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if...

ASTM E220-25 - Standard Test Method for Calibration of Thermocouples by Comparison Techniques
May 1, 2025 - ASTM International

1.1 This test method describes the principles, apparatus, and procedure for calibrating thermocouples by comparison with a reference thermometer. Calibrations are covered over temperature ranges appropriate to the individual types of thermocouples within an overall range from approximately...

Advertisement