OVERVIEW This manual begins with a nontechnical explanation of seismic loads to help designers and builders appreciate the need for seismic restraints. Chapter 2 explains the steps in using the drawings and tables and includes two worked examples. Chapter 3 outlines the general...
This manual covers the anchorage and bracing of pipes and conduits up to 16" in diameter, round ducts up to 84" in diameter, rectangular ducts up to 120" × 60", and square ducts up to 96". For dimensions of duct not specifically given in the tables, the tables may be applied using the weight per...
Preface The purpose of this guide is to provide examples related to the use of the Standard ASCE/SEI 7-10, Minimum Design Loads for Buildings and Other Structures (often referred to as ASCE 7). The guide is also pertinent to users of the 2012 International Building Code (ICC, 2011 ) because the IBC...
Preface The purpose of this guide is to provide the reader with a set of examples related to the use of ASCE Standard 7, Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-05). The guide is also pertinent to users of the 2006 International Building Code (ICC 2006) because IBC...
5.1 The seismic downhole method provides a designer with information pertinent to the seismic wave velocities of the materials in question (1). The P-wave and S-wave velocities are directly related to the important geotechnical elastic constants of Poisson's ratio, shear modulus, bulk...
1.1 This practice establishes a method for alternative shear wall systems to compare seismic equivalency parameters (SEP) derived from cyclic in-plane racking tests to performance targets derived from tests of light-frame shear walls constructed with wood structural panel (WSP) sheathing...
1.1 This specification covers cylindrical tanks fabricated by filament winding or contact-molding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure as classified herein, and made of a commercial-grade polyester or vinylester resin. Included are...
4.1 This guide is intended to be used by architects, engineers, and contractors who either design or install exterior stone cladding for architectural structures. 4.2 This guide is an industry standard for engineering design considerations, documentation, material considerations, anchor type...
1.1 These test methods cover procedures for static tensile and shear testing of post-installed and cast-in-place anchorage systems in members made of concrete or members made of solid, hollow, or grout-filled masonry and related materials. Tests may be made to determine the ultimate load or to...
4.1 This guide is intended to be used by architects, engineers, and contractors who either design or install exterior stone cladding for architectural structures. 4.2 This guide is an industry standard for engineering design considerations, documentation, material considerations, anchor type...
5.1 Crosshole seismic tests provide data about the seismic wave velocities of subsurface stratigraphic materials between boreholes as a function of depth at a site (1).3 Seismic wave velocities are directly related to the important geotechnical elastic constants, which are...
4.1 This guide is intended to be used by architects, engineers, and contractors who either design or install exterior stone cladding for architectural structures. 4.2 This guide is an industry standard for engineering design considerations, documentation, material considerations, anchor type...
4.1 This guide is intended to be used by architects, engineers, and contractors who either design or install exterior stone cladding for architectural structures. 4.2 This guide is an industry standard for engineering design considerations, documentation, material considerations, anchor type...
4.1 Uses-This guide is intended for use on a voluntary basis by parties such as lenders, loan servicers, insurers and equity investors in real estate (Users) who wish to estimate possible earthquake losses to buildings. This guide outlines procedures for conducting a seismic risk assessment...
This practice covers acoustical ceiling suspension systems and their additional requirements for application in areas subject to light to moderate seismic disturbance such as Uniform Building Code Seismic Zone 2, the BOCA Basic National Building Code where Av is less than 0.20 but...
1.1 This specification covers cylindrical tanks fabricated by filament winding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure as classified herein, and made of a commercial-grade polyester or vinylester resin. Included are requirements for materials,...
5.1 This practice is intended for use as a voluntary standard by parties who wish to undertake the seismic risk assessment of properties. The goal is for users to objectively and reliably compare the financial risks of earthquake damage to buildings, or groups of buildings, on a consistent...
Narrow Your Results