4.1 Shipping containers are exposed to complex dynamic stresses when subjected to vibration present in transportation vehicles. Approximating the actual damage, or lack of damage, experienced in shipping may require subjecting the container(s) and contents to vibration inputs. 4.2...
1.1 This test method covers the determination of mold growth resistance of Wet Blue and Wet White subject to storage and shipping requirements and intended for use in leather manufacturing. This test method may not be suitable to evaluate fungicides that are inactivated by proteins. This...
5.1 Resiliency may be used to control the quality of many TRMs. Resiliency may be indicative of a TRM's ability to retain original configuration after exposure to the stresses which may be exerted during manufacture, shipping, and installation. Resiliency is not generally indicative of field...
1.1 This specification provides the chemical and physical requirements for nuclear-grade gadolinium oxide powder intended for subsequent processing and use in nuclear fuel applications, for example, as an addition to uranium dioxide. 1.2 This specification does not include requirements for health...
5.1 Information on the vapor pressures of liquefied petroleum gas is pertinent to selection of properly designed storage vessels, shipping containers, and customer utilization equipment to ensure safe handling of these products. 5.2 Determination of the vapor pressure of liquefied petroleum...
1.1 This practice is intended to provide guidance and direction in the handling, transporting, shipping, storage, receiving, and application of thermal insulating materials to be used as a surface treatment or as part of the thermal insulation system in contact with austenitic stainless...
This specification covers the performance requirements and test methods for paintball markers that propel paintballs using energy released from compressed air, compressed gas, or a combination of compressed air and gas. This does not cover non-recreational paintball markers such as those used in...
1.1 This practice describes standardized procedures for the preparation, spraying, packaging, and shipping of fresh spray polyurethane foam (SPF) insulation product samples to be tested for their emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs)....
1.1 This guide covers the general technique of "spiking" a broad range of materials into aqueous media. This guide will serve the analyst in preparing spiked samples for quality control purposes. Guidance is also provided to aid the analyst in calculating recoveries and interpreting results. It is...
5.1 The data from this guide seldom, if ever, directly simulate thermal and pressure events in the processing, storage, and shipping of chemicals (see Appendix X2.1.1 for more detail). However, the data obtained from this guide may be used, with suitable precautions, to predict the thermal...
5.1 The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material. 5.2 Flash...
5.1 ASTM test methods are frequently intended for use in the manufacture, selling, and buying of materials in accordance with specifications and therefore should provide such precision that when the test is properly performed by a competent operator, the results will be found satisfactory for...
5.1 This practice provides a method for conditioning packaging systems using climatic conditions that occur in actual distribution. The recommended exposure levels are based on available information on shipping, handling and storage environments, current industry practices, and published...
4.1 These test methods will allow the user to determine integrity and stability of the load as well as provide guidance to improve the design of the shipping container or the unit load where deficiencies are found. 4.2 Damage to products or packages observed during testing can be expected to...
1.1 This specification covers reinforced solid elements manufactured from autoclaved aerated concrete (AAC), a cementitious product addressed by Specification C1693. The specification addresses dimensional tolerances, maximum limits for drying shrinkage, requirements for steel reinforcement, and...
1.1 This specification covers nuclear grade uranium hexafluoride (Enriched Commercial UF6) that either has been processed through an enrichment plant or has been produced by the blending of Highly Enriched Uranium (HEU) with other uranium to obtain uranium of any 235U enrichment from more than 8?%...
1.1 This guide helps describe the laboratory informatics landscape and covers issues commonly encountered at all stages in the life cycle of laboratory informatics from inception to retirement. It explains the evolution of laboratory informatics tools used in today's laboratories such as laboratory...
5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 5.2. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...
5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...
1.1 This specification covers uranium ore concentrate containing a minimum uranium mass fraction of 65?%. 1.2 This specification does not include requirements for health and safety. Observance of this specification does not relieve the user of the obligation to be aware of and conform to all...
Narrow Your Results