loading
CRSI SHOP SAFETY - Manual of Guidelines for Shop Safety
CRSI

The Manual of Guidelines for Shop Safety is a comprehensive pocket-sized (4" x 6") publication which includes a variety of shop safety aspects and guidlines. Includes information on the use of shop equipment including crane safety. Product code: 30-SSM

ASTM F3176-20(2026) - Standard Specification for Special Needs Shopping Carts
June 1, 2026 - ASTM International

1.1 This standard covers performance requirements, test methods, and marking/labeling requirements for special needs shopping carts. 1.2 This standard is intended to address special needs shopping carts for use by children and adults with special needs. 1.3 This standard does not...

ASTM F3728-26 - Standard Specification for Release Characteristics of Ski-Binding-Boot (S-B-B) Systems for Recreational Skiing
July 1, 2026 - ASTM International

1.1 This specification covers the required release and retention characteristics of ski-binding-boot (S-B-B) systems. This specification is applicable to all recreational snow skiing bindings that have safety release mechanisms. Specifically, this performance standard establishes the minimum...

ASTM B614-26 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
April 1, 2026 - ASTM International

1.1 This practice covers a cleaning and descaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants...

ASTM D7522/D7522M-26 - Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates
March 15, 2026 - ASTM International

1.1 This test method describes the apparatus and procedure for evaluating the pull-off strength of wet lay-up or pultruded (shop-fabricated) Fiber Reinforced Polymer (FRP) laminate systems adhesively bonded to a flat concrete substrate. The test determines the greatest perpendicular force...

ASTM C450-18(2026) - Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
March 1, 2026 - ASTM International

1.1 This practice provides tables of dimensions of preformed pipe insulation that shall be used in fabricating insulation covers for use on valves, ells, tees, flanges, and vessels in the pressure range from 150 to 1500 psi (1 to 10 MPa). These tables, which are part of this standard, are published...

ASTM F2970-25 - Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
December 1, 2025 - ASTM International

1.1 The purpose of this practice is to delineate requirements regarding the design, manufacture, installation, operation, maintenance, inspection and major modification of commercial or institutional trampoline courts designed for amusement, entertainment or recreation. 1.2 This standard applies to...

ASTM D4940-25 - Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
May 1, 2025 - ASTM International

4.1 Abrasive media may contain ionic contamination naturally (for example, mineral abrasives), from manufacturing (quenching with contaminated water), transportation, storage or use (in the case of abrasive that is reused). Ionic contamination on the abrasive may transfer to the surface during...

ASTM D4414-25 - Standard Practice for Measurement of Wet Film Thickness by Notch Gages
July 1, 2025 - ASTM International

4.1 Wet film thickness measurements of coatings applied on articles can be very helpful in controlling the thickness of the final dry coating, although in some specifications the wet film thickness is specified. Most protective and high performance coatings are applied to meet a requirement or...

ASTM D7393-25 - Standard Practice for Indicating Oil in Abrasives
May 1, 2025 - ASTM International

1.1 This practice is used to determine the presence of oil in abrasives used for abrasive blast cleaning. 1.2 The procedure can be used in the laboratory, field, blast and paint shop or steel fabrication shop. 1.3 The values stated in SI units are to be regarded as the standard. The...

ASTM D5933-25 - Standard Specification for 258-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
April 1, 2025 - ASTM International

1.1 This specification covers standardizing the dimensions and materials for the manufacture of 25/8-in.?and 4-in. diameter steel or cast iron shear plates used in the fabrication of connections in wood constructions. The referencing of this specification in design, construction, and purchase order...

ASTM D4801-08(2025) - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
January 1, 2025 - ASTM International

This specification covers the requirements for extruded (cast or blown) and compression-molded sheeting made from low-, medium-, and high-density polyethylenes and copolymers in specified thicknesses. Depending on the functional requirements, sheeting conforming to this specification is used in...

ASTM F3328-18(2024) - Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
October 1, 2024 - ASTM International

5.1 Solvent cement bonder/installers shall follow all procedures to produce consistently strong and leak-free joints, either in shop operations or in the field.

ASTM C1314-24 - Standard Test Method for Compressive Strength of Masonry Prisms
December 1, 2024 - ASTM International

4.1 This test method provides a means of verifying that masonry materials used in construction result in masonry that meets the specified compressive strength (Note 1). Note 1: A prism is an assembly of components used to measure (in this case, the tested compressive strength of masonry, f mt) or...

ASTM D2855-20(2024) - Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
September 1, 2024 - ASTM International

5.1 A solvent cement bonder/installer must follow all procedures to produce consistently strong and leak-free joints, either in shop operations or in the field.

ASTM F2015-00(2024) - Standard Specification for Lap Joint Flange Pipe End Applications
November 15, 2024 - ASTM International

This specification covers the material and dimensional requirements applicable to lap joint flange pipe ends that are manufactured by a mechanical forming process, and are widely used for low-pressure systems in the marine, process piping, and similar industries. Materials having acceptable forming...

ASTM C660-24 - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
November 1, 2024 - ASTM International

These practices are intended for production and preparation of gray iron castings for porcelain enamelling. Design of the casting should be such as to minimize variations in temperature during firing and cooling. The governing factors in pattern layout and shop control are elimination of...

ASTM F3728-24 - Standard Specification for Release Characteristics of Ski-Binding-Boot (S-B-B) Systems for Recreational Skiing
December 1, 2024 - ASTM International

1.1 This specification covers the required release and retention characteristics of ski-binding-boot (S-B-B) systems. This specification is applicable to all recreational snow skiing bindings that have safety release mechanisms. Specifically, this performance standard establishes the minimum...

ASTM B1029-24 - Standard Practice for Making Press-Connect Joints with Seamless Copper and Copper Alloy Tube and Press Fittings
July 1, 2024 - ASTM International

5.1 The techniques described herein are used to produce leak-tight press-connect joints between copper and copper alloy tube and fittings either in shop operations or the field. Operator or mechanic's skill and knowledge is required to obtain a satisfactory joint. 5.1.1 Refer to...

ASTM D4752-20(2024) - Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
June 1, 2024 - ASTM International

1.1 This practice describes a solvent rub technique for assessing the MEK resistance of ethyl silicate (inorganic) zinc-rich primers. The MEK resistance of some two-component ethyl silicate zinc-rich primers has been shown to correlate well with the cure of the primer as determined by diffuse...

Advertisement