loading
NEMA USER GUIDE - USER GUIDE TO PRODUCT SPECIFICATIONS FOR ELECTRICAL BUILDING WIRE AND CABLE
January 1, 2005 - NEMA

USER GUIDE TO PRODUCT SPECIFICATIONS FOR ELECTRICAL BUILDING WIRE AND CABLE This Guide is published by the Building Wire and Cable Section of the National Electrical Manufacturers Association to assist users of commonly utilized electrical building wire and cable on the proper...

IEEE SIGNAL TECHNOLOGY - SIGNAL PROCESSING TECHNOLOGY AND APPLICATIONS
IEEE
A description is not available for this item.
IEEE SIGNAL PROCESSING - DIGITAL SIGNAL PROCESSING HANDBOOK
IEEE
A description is not available for this item.
ASTM E1139/E1139M-17(2025) - Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
July 1, 2025 - ASTM International

5.1 Acoustic emission examination of a structure requires application of a mechanical or thermal stimulus. In this case, the system operating conditions provide the stimulation. During operation of the pressurized system, AE from active discontinuities such as cracks or from other acoustic sources...

ASTM E2582-21(2025) - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
September 1, 2025 - ASTM International

5.1 Typically, FT is used to identify flaws that occur in the manufacture of composite structures, or to identify and track flaws that develop during the service lifetime of the structure. Flaws detected with FT include delamination, disbonds, voids, inclusions, foreign object debris, porosity, or...

ASTM D6820-25 - Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation
July 1, 2025 - ASTM International

5.1 Concepts: 5.1.1 All TDEM/TEM instruments are based on the concept that a time-varying magnetic field generated by a change in the current flowing in a large loop on the ground will cause current to flow in the earth below it (Fig. 3). In the typical TDEM/TEM system, these earth-induced currents...

ASTM E1495/E1495M-17(2025) - Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
July 1, 2025 - ASTM International

1.1 This guide explains the rationale and basic technology for the acousto-ultrasonic (AU) method. Guidelines are given for nondestructive evaluation (NDE) of flaws and physical characteristics that influence the mechanical properties and relative strength of composite structures (for example,...

ASTM E2213-03(2024) - Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications
November 1, 2024 - ASTM International

1.1 This specification2 describes a medium access control (MAC) and physical layer (PHY) specification for wireless connectivity using dedicated short-range communications (DSRC) services. This standard is based on and refers to IEEE Standards 802.11, "Wireless LAN Medium Access Control and...

ASTM E2566/E2566M-24 - Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
November 1, 2024 - ASTM International

1.1 The purpose of this test method is to specify the apparatuses, procedures, and performance metrics necessary to quantitatively measure a robot's visual acuity as displayed to a remote operator or vision algorithm. The primary performance metric for this test method shall be a robot's possession...

ASTM E3370-24 - Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals
June 1, 2024 - ASTM International

5.1 The procedures described in this practice have proven utility in the inspecting (1) monolithic polymer matrix composites (laminates) for bulk defects, (2) metals for corrosion during the service life of the part of interest, (3) thickness checks, (4) adhesive bonding of metals, composites, and...

UL 749 - Household Dishwashers
May 25, 2023 - ULSE

1.1 This Standard applies to electric household dishwashers intended to be used in nonhazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I) and the National Electrical Code (NEC), NFPA 70, on circuits having a nominal voltage not exceeding 250 V. 1.2...

ASTM F2960-23 - Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices
June 1, 2023 - ASTM International

4.1 The user of this standard shall be required to review and comply with the referenced "core" ASTM F24 Committee standards in 2.1 of this standard. Modified or alternate requirements to those standards may be required in this standard. 4.1.1 Amusement railway sub-systems may be built to...

ASTM E3397-23 - Standard Practice for Resonance Testing Using the Impulse Excitation Method
July 1, 2023 - ASTM International

1.1 This practice covers a general procedure for using the Impulse Excitation Method (IEM) to facilitate natural frequency measurement and detection of defects and material variations in metallic and non-metallic parts. This test method is also known as Impulse Excitation Technique (IET), Acoustic...

ASTM E3370-23 - Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals
July 1, 2023 - ASTM International

5.1 The procedures described in this practice have proven utility in the inspecting (1) monolithic polymer matrix composites (laminates) for bulk defects, (2) metals for corrosion during the service life of the part of interest, (3) thickness checks, (4) adhesive bonding of metals, composites, and...

ATIS 1000609 - Interworking between the ISDN User-Network Interface Protocol and Signalling System Number 7 ISDN User Part
June 1, 2014 - ATIS

This standard is aimed at defining the interworking relationship between the call control protocol of the ISDN User-Network Interface Protocol and the ISDN User Part of SS7. This standard defines in detail the relationship between signalling information conveyed via the...

ASTM F3109-23 - Standard Practice for Verification of Multi-Axis Force Measuring Platforms
March 1, 2023 - ASTM International

5.1 Multi-axis force measuring platforms are used to measure the ground reaction forces produced at the interface between a subject's foot or shoe and the supporting ground surface. These platforms are used in various settings ranging from research laboratories to healthcare facilities. The...

ASTM F1166-23 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
January 1, 2023 - ASTM International

4.1 The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability. 4.2...

ASTM E3370-22 - Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals Used in Aerospace Applications
December 1, 2022 - ASTM International

5.1 The procedures described in this practice have proven utility in the inspecting (1) monolithic polymer matrix composites for bulk defects, (2) metals for corrosion during the service life of the part of interest, (3) thickness checks, (4) adhesive bonding of metals, composites, and sandwich...

ASTM F1166-22 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
September 1, 2022 - ASTM International

4.1 The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability. 4.2...

ASTM F3109-22 - Standard Practice for Verification of Multi-Axis Force Measuring Platforms
September 1, 2022 - ASTM International

5.1 Multi-axis force measuring platforms are used to measure the ground reaction forces produced at the interface between a subject's foot or shoe and the supporting ground surface. These platforms are used in various settings ranging from research laboratories to healthcare facilities. The...

Advertisement