loading
AWCI 114 - Thickness Gauges
AWCI

Thickness Gauges - 121 Measure the thickness of sprayed fire protection materials with this specially designed rule with a needle probe and sliding indicator. It has been approved for use by most code authorities and complies with criteria outlined in AWCI Technical Manual T-12A

ASTM D8136-24 - Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
December 1, 2024 - ASTM International

1.1 This test method covers the determination of the thickness of plastic film, ranging in thickness from 2.5 to 250 μm, with a non-contact thickness gauge that uses capacitance-based technology. It includes a method to generate a series of thickness data points...

ASTM D8136 - Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
September 1, 2017 - ASTM

This test method covers the determination of the thickness of plastic film, ranging in thickness from 2.5 to 250 μm, with a non-contact thickness gauge that uses capacitance-based technology. It includes a method to generate a series of thickness data points that...

ASTM D8136-17 - Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
September 1, 2017 - ASTM International

1.1 This test method covers the determination of the thickness of plastic film, ranging in thickness from 2.5 to 250 µm, with a non-contact thickness gauge that uses capacitance-based technology. It includes a method to generate a series of thickness data points...

SAA AS/NZS 1635.9.1 - THICKNESS
SAI
A description is not available for this item.
ASTM E376-26 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
July 1, 2026 - ASTM International

1.1 This practice covers the use of magnetic- and eddy current-type thickness instruments (gauges) for nondestructive thickness measurement of a coating on a metal (that is, electrically conducting) substrate. The substrate may be ferrous or nonferrous. The coating or plating...

NR BRS-SM 2500 - Type 63 Point Machine Detection Gauges 1mm and 2mm Thickness
January 30, 1995 - NR
A description is not available for this item.
ASTM D7378-16(2024) - Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
February 1, 2024 - ASTM International

5.1 Many physical and appearance properties of the finished coating are affected by the film thickness. Film thickness can affect the color, gloss, surface profile, adhesion, flexibility, impact resistance and hardness of the coating. The fit of pieces assembled after coating can be...

ASTM E376-11 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
July 1, 2011 - ASTM International

General-No presently available thickness gauge is applicable to all combinations of coating-substrate thicknesses and materials. The limitations of a particular instrument are generally delineated by its manufacturer. Magnetic-Magnetic-type gauges measure either magnetic...

ASTM E376-19 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
May 1, 2019 - ASTM International

1.1 This practice covers the use of magnetic- and eddy current-type thickness instruments (gauges) for nondestructive thickness measurement of a coating on a metal (that is, electrically conducting) substrate. The substrate may be ferrous or nonferrous. The coating or plating...

BS ISO 10834 - Textile floor coverings - Non-destructive measurement of pile thickness above the backing - WRONZ gauge method
March 15, 1993 - BSI

Specifies a method which is useful for production control in manufacture and for measurements on installed carpets.

GMKOREA EDS-T-7624 - Test Method for Determining Thickness of Trim Materials
October 1, 2011 - GMKOREA

This standard shall specify the test method which determines, by means of calipers or special compression type gauges, the thickness of trim materials such as textiles, plastic films, leather cloths, fiberboard, carpet, felt, flexible cellular materials etc. PURPOSE The purpose of...

GME 60303 - Test Method for Determining Thickness of Trim Materials
July 6, 2010 - GME

This test method shall be used for determining, by means of calipers or special compression type gauges, the thickness of trim materials such as textiles, plastic films, leatherclothes, paper, fibreboard, carpet, felt , rubberized hair, flexible cellular materials etc.

MIL-G-4412 - GAGES, THICKNESS
May 23, 1952 - NPFC

This specification covers thickness gages that shall be used for maintenance and inspection purposes. Thickness gages covered by this specification shall be of the following types as specified (see 6.1): Type I - Gage, 26 Leaf, Tapered Type II - Gage, 6 Leaf, Straight Type III - Gage,...

ASTM E376-17 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
November 1, 2017 - ASTM International

1.1 This practice covers the use of magnetic- and eddy current-type thickness instruments (gauges) for nondestructive thickness measurement of a coating on a metal (i.e. electrically conducting) substrate. The substrate may be ferrous or nonferrous. The coating or plating being...

ASTM D5994/D5994M-26 - Standard Test Method for Measuring the Thickness of Geomembranes
April 1, 2026 - ASTM International

1.1 This test method covers a procedure to measure the thickness of smooth geomembranes and core thickness of textured geomembranes. 1.2 This test method does not provide thickness values for geomembranes under variable normal stresses. 1.3 The values stated in either SI units...

Advertisement