loading
ASME B1.25 - Measurement Uncertainty Factors in the Calibration of Screw Thread Gages
May 24, 2019 - ASME

(a) This Standard notes technical factors that can explain measurement differences between two parties calibrating the same gage. It is directed to the metrology involved, not acceptance rules or other quality considerations. (b) While measurement uncertainty applies to the calibration of...

ASTM F1498-25 - Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
December 1, 2025 - ASTM International

This specification establishes requirements for dimensions and gaging of taper pipe threads used on threaded plastic pipe and fittings. The type of pipe threads are designated by specifying in sequence the nominal pipe size, number of threads per inch, and the...

IFI-301 - Gage Calibration Requirements and Procedures for Thread Gages
January 1, 2008 - IFI/FASTNR
A description is not available for this item.
ASME B1 TECHNICAL REPORT - Measurement Uncertainty for 60 Deg. Screw Thread Gage Element Measurement (Inch and Metric)
January 1, 1993 - ASME

This Report provides estimates of uncertainty associated with the measurement of pitch diameter, lead and flank angle only for screw thread gages. It is intended that these estimates will be used as a guide to resolve measurement disputes arising between any two parties calibrating...

ASTM A123/A123M-24 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
May 1, 2024 - ASTM International

1.1 This specification covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips. 1.2 This specification covers both unfabricated products and fabricated products, for...

ASTM D2911/D2911M-16(2023) - Standard Specification for Dimensions and Tolerances for Plastic Bottles
November 1, 2023 - ASTM International

1.1 This specification covers the thread configuration and dimensions for finishes for plastic bottles with screw-type closures, having a maximum capacity of 18.9 L (5 gal) and a maximum bottle dimension of 305 mm (12 in.). Included are tolerances for bottle capacity and body dimensions. 1.2...

MA1566B - Gaging Practice and Gage Requirements for MJ Metric Screw Threads
July 16, 2018 - SAE International

This standard covers the gaging practice and gage requirements for aerospace metric screw thread, MJ profile in accordance with MA1370.

FED-STD-H28 - SCREW-THREAD STANDARDS FOR FEDERAL SERVICES
April 24, 2019 - NPFC

This standard includes the basic screw thread dimensional and acceptability requirements for common screw thread forms and applications. Design and use information are also provided when necessary. Specific requirements for particular screw threads, gages, etc., are...

AS59158A - Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes
August 3, 2020 - SAE International

This SAE Aerospace Standard (AS) describes taps, thread plug gages, inserting tools, expanding tools, offset and staking tools, tang break-off tools, extracting tools and thread repair kits.

AS5870 - Thread Inspection Practices
February 3, 2020 - SAE International

This document addresses AS8879 thread inspection issues relating to selection, usage and capability of gages. It addresses the selection of calibrated measurement gages, the need for defined quality metrics, the methodology of determining the appropriate guardband factors, and...

ASTM F2070-00(2022) - Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
October 1, 2022 - ASTM International

This specification covers the requirements for pressure and differential pressure transducers for general applications. Pressure transducers typically consist of a sensing element that is in contact with the process medium and a transduction element that modifies the signal from the sensing element...

GM AIR_GAGE - Air Pressure Gages
September 1, 2010 - GMNA
A description is not available for this item.
API BUTTRESS THREAD JOINT - Buttress Thread Joint Strength
November 7, 1969 - API
A description is not available for this item.
DIN GUIDE TO SCREW THREAD - INTERNATIONAL GUIDE TO SCREW THREADS
DIN
A description is not available for this item.
J512_202203 - Automotive Tube Fittings
March 31, 2022 - SAE International

This SAE Standard covers complete general and dimensional specifications for the various types of tube fittings intended for general application in the automotive, appliance, and allied fields. See SAE J1131 for the performance requirements of reusable (push to connect) fittings intended for use in...

MIL-G-46382 - GAGES, SNAP, THREAD ROLL
NPFC
A description is not available for this item.
ASTM F1498-08(2020) - Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
November 1, 2020 - ASTM International

This specification establishes requirements for dimensions and gaging of taper pipe threads used on threaded plastic pipe and fittings. The type of pipe threads are designated by specifying in sequence the nominal pipe size, number of threads per inch, and the...

AIR5926 - White Paper to Support Supersession of MIL-S-8879C With AS8879C
August 23, 2018 - SAE International

This paper was prepared to support supersession of MIL-S-8879C with Screw Thread Conformity Task Force selected industry standard AS8879C, published by the Society of Automotive Engineers (SAE). Other documentation changes will be covered by separate papers. Separate papers are anticipated...

ASTM E606/E606M-21 - Standard Test Method for Strain-Controlled Fatigue Testing
June 1, 2021 - ASTM International

1.1 This test method covers the determination of fatigue properties of nominally homogeneous materials by the use of test specimens subjected to uniaxial forces. It is intended as a guide for fatigue testing performed in support of such activities as materials research and development, mechanical...

Advertisement