loading
ASME B18.31.3 - Threaded Rods (Inch Series)
January 1, 2014 - ASME

This Standard covers the general and dimensional data for inch series threaded rods. Included are the following thread configurations and diameters: (a) UNC threads #4 through 4 in. (b) UNF threads #4 through 1½ in. (c) 8UN threads 11⁄8 in. through 4 in....

ASME B18.31.4M - Threaded Rod (Metric Series)
January 1, 2009 - ASME

INTRODUCTION This Standard covers the complete general and dimensional data for metric series threaded rod recognized as an American National Standard. This Standard is applicable to both fine and coarse metric series threads of diameters from M1.6 to M56, as indicated in Table...

ASTM A307-21 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength
February 15, 2021 - ASTM International

This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in specified sizes. This specification does not cover the requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors, or...

NAS358 - TUBE ASSEMBLY, CONTROL, STEEL, WITH WELDED THREADED ROD-ENDS
April 30, 2019 - AIA/NAS
A description is not available for this item.
ASTM A307 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
February 15, 2021 - ASTM

This specification2 covers the chemical and mechanical requirements of two grades of carbon steel bolts and studs in sizes 1⁄4 in. through 4 in. The fasteners are designated by "Grade" denoting tensile strength and intended use, This specification does not cover requirements for machine screws,...

ASTM G116-99(2025) - Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
October 1, 2025 - ASTM International

1.1 This practice covers the evaluation of atmospheric galvanic corrosion of any anodic material that can be made into a wire when in contact with a cathodic material that can be made into a threaded rod. 1.2 When certain materials are used for the anode and cathode, this practice has...

ASTM A354-26 - Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
March 1, 2026 - ASTM International

1.1 This specification ?covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, threaded rod, and other externally threaded fasteners 4 in. and under in diameter for application at normal atmospheric temperatures, where high strength...

NAS355 - TUBE ASSEMBLY, CONTROL, ALUMINUM ALLOY, WITH RIVETED THREADED ROD ENDS
February 29, 2016 - AIA/NAS
A description is not available for this item.
ASTM B453/B453M-19(2026) - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
January 1, 2026 - ASTM International

1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from copper alloy UNS Nos. C33500, C34000, C34500, C35000, C35300, C35330, C35350, and C35600. These alloys have nominal composition given in Table 1. 1.1.1 This...

ASTM A307-14 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
October 1, 2014 - ASTM International

This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in specified sizes. This specification does not cover the requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors, or...

ASTM A307-14e1 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
October 1, 2014 - ASTM International

This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in specified sizes. This specification does not cover the requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors, or...

ASTM A307-12 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
December 1, 2012 - ASTM International

This specification covers the chemical and mechanical requirements for three grades (Grades A, B, and C) of carbon steel bolts and studs in specified sizes. This specification does not cover the requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors, or...

AS49011B - ROD END - THREADED, AIRCRAFT
November 26, 2018 - SAE International
A description is not available for this item.
ASTM B366/B366M-25 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
November 1, 2025 - ASTM International

1.1 This specification covers wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys. Threaded fittings as covered in ASME B16.11 are also covered by this specification. The term welding applies to butt-welding or socket-welding parts such as 45° and 90°...

NAS359 - TUBE ASSEMBLY, CONTROL, STEEL, WITH WELDED CLEVIS AND THREADED ROD ENDS
October 31, 2016 - AIA/NAS
A description is not available for this item.
ASTM F1516-23 - Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
May 1, 2023 - ASTM International

4.1 Seams in some resilient flooring are heat sealed to prevent openings from forming between cut edges and to prevent penetrations of dirt, liquids, etc., into the seams. Decorative appearances may also be achieved using contrasting heat weld thread (rod).

ASTM D6709-25 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
April 1, 2025 - ASTM International

1.1 This test method covers the evaluation of automotive engine oils (SAE grades 0W, 5W, 10W, 20, 30, 40, and 50, and multi-viscosity grades) intended for use in spark-ignition gasoline engines. The test procedure is conducted using a carbureted, spark-ignition Cooperative Lubrication Research...

DIN 975 - THREADED RODS (NOT INTENDED FOR NEW DESIGN)
DIN
A description is not available for this item.
ASTM B16/B16M-24 - Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
July 1, 2024 - ASTM International

1.1 This specification covers the requirements for free-cutting brass rod, bar, wire, and shapes of any specified cross section produced from Copper Alloy UNS Nos. C36000 or C36010 suitable for high-speed screw machining applications and moderate thread rolling. 1.2 Units-Values...

AS49011A - ROD END - THREADED, AIRCRAFT
April 21, 2015 - SAE International
A description is not available for this item.
Advertisement