loading
ICBO MANUAL STEEL - ASD MANUAL OF STEEL CONSTRUCTION
ICBO
A description is not available for this item.
GM TOOLKIT - GM TOOLKIT
GMNA
A description is not available for this item.
SWI STEEL WINDOWS - THE ARCHITECT'S GUIDE TO STEEL WINDOWS
SWI
A description is not available for this item.
AWWA STEEL PIPE SET - AWWA STEEL PIPE SET
AWWA
A description is not available for this item.
MPIF STEELS METALLURGY - STEELS, METALLURGY AND APPLICATIONS
MPIF
A description is not available for this item.
ASTM C1824-16(2026) - Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
June 1, 2026 - ASTM International

5.1 This test method is intended to provide the user with acceptable apparatus requirements and a prescribed procedure to determine the bending moment capacity of spun pre-stressed concrete bases for use with tapered steel poles. 5.2 The results of this test method are used as a basis for...

ASTM D2200-26 - Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
June 1, 2026 - ASTM International

4.1 The appearance of the various degrees of dry and wet abrasive blast cleaning, hand and power tool cleaning, and water jetting are influenced by the initial rust grades of the steel being cleaned and/or the type and condition of the coating on the existing steel. The...

ASTM D8271-26 - Standard Test Method for Direct Measurement of Surface Profile of Prepared Concrete
June 1, 2026 - ASTM International

4.1 Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive blast cleaning, acid etching or various...

ASTM E1685-20(2026) - Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
April 1, 2026 - ASTM International

1.1 This practice covers a procedure for measuring changes in length of threaded bolts using the ultrasonic pulse-echo technique. 1.2 This procedure is normally intended for metal bolting 6.3 mm or more in nominal diameter with effective length-to-diameter ratios of 2:1 or greater. 1.3 The values...

ASTM C1963-26 - Standard Test Method for Air-Permeability Coefficient of Hardened Concrete by the Double-Chamber Vacuum Cell Method
February 15, 2026 - ASTM International

4.1 This test method covers the determination of the air-permeability coefficient, kT, of hardened concrete, and is applicable to laboratory testing of specimens or to in-place testing of concrete elements. 4.2 The air-permeability coefficient, kT, is closely related to the structure (volume, size,...

ASTM D6252/D6252M-98(2025) - Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the peel adhesion of pressure-sensitive label stocks. This test method gives a measure of the adherence to a standard steel substrate or to other surfaces of interest for a pressure-sensitive label stock. 1.2 This test method provides a means of...

ASTM D3330/D3330M-04(2025) - Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
August 1, 2025 - ASTM International

5.1 These test methods are tools for quality assurance use. Given specific pressure-sensitive tape and a requirement in terms of the minimum or maximum peel value expected for this tape, the data from the test can be used in conjunction with acceptance criteria. 5.2 Test Method A, B, C, E,...

ASTM A597/A597M-14(2024) - Standard Specification for Cast Tool Steel
August 15, 2024 - ASTM International

This specification covers tool steel compositions appropriate for usable shapes cast by pouring directly into suitable molds and for master heats for remelting and casting. Grades of the tool steel covered in this specification include air- and oil-hardening grades such...

ASTM G194-25 - Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
July 1, 2025 - ASTM International

1.1 This test method covers the use of an angled launch ramp to initiate rolling of a sphere or nearly spherical shape, referred to as the specimen throughout this document, on a flat horizontal plane, referred to as the rolling surface, to determine the rolling friction characteristics of a given...

ASTM A561-08(2024) - Standard Practice for Macroetch Testing of Tool Steel Bars
August 15, 2024 - ASTM International

This practice covers macroetch testing used for evaluating the quality of tool steel bars. This test shall be used as a quality control and inspection test to reveal by deep acid etching, the macrostructure in specimens cut from bars and to show the presence, absence, and severity of...

Advertisement