loading
ASTM G205-26 - Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
May 1, 2026 - ASTM International

5.1 In the absence of water, the crude oil is noncorrosive. However, trace amounts of water and sediment have the potential to create corrosive situations during crude oil handling or transport if such materials accumulate and persist on steel surfaces. Test Methods D473 and D4006 provide...

ASTM D5464-25 - Standard Test Method for pH Measurement of Water of Low Conductivity
January 1, 2025 - ASTM International

1.1 This test method is applicable to determine the pH of water samples with a conductivity of 2?μS/cm to 100?μS/cm over the pH range of 3 to 11 and is frequently used in power generation low conductivity samples. pH measurements of water of low conductivity are problematic....

ASTM D7046-25 - Standard Guide for Use of the Metal Detection Method for Subsurface Site Investigations
July 1, 2025 - ASTM International

1.1 Purpose and Application-This guide summarizes the equipment, field procedures, and interpretation methods for the assessment of subsurface materials using the electromagnetic (EM) metal detection method and therefore in this guide the term "metal detector" is used to refer to an EM metal...

ASTM C698-24 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
December 1, 2024 - ASTM International

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Uranium in the...

ASTM C1458-24 - Standard Test Method for Nondestructive Assay of Plutonium, Tritium and?241Am by Calorimetric Assay
December 1, 2024 - ASTM International

5.1 This test method is useful for determining the quantity of one or more isotopes present in a container like in the context of process monitoring, safeguard and inventory of nuclear materials. 5.1.1 Calorimetry is considered to be an established NDA method for the measurement of tritium. It is...

ASTM C697-24 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
October 15, 2024 - ASTM International

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade plutonium dioxide powders and pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Plutonium Sample...

ASTM D7677-16(2023) - Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
November 1, 2023 - ASTM International

1.1 This test method covers the on-line and in-line determination of dissolved ozone (DO3) in low conductivity water in the range from 0.001 mg/L to 5.0 mg/L DO3 and conductivity <100 μS/cm, typical of pharmaceutical and microelectronics pure waters. DO3 is detected by correlating the...

ASTM D5744-18(2024) - Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
May 1, 2024 - ASTM International

5.1 The laboratory weathering procedure will generate data that can be used to: (1) determine whether a solid material will produce an acidic, alkaline, or neutral effluent, (2) identify solutes in the effluent that represent dissolved weathering products formed during a specified period of time,...

ASTM D1125-23 - Standard Test Methods for Electrical Conductivity and Resistivity of Water
April 1, 2023 - ASTM International

1.1 These test methods cover the determination of the electrical conductivity and resistivity of water. The following test methods are included: Range Sections Test Method A-Field and Routine Laboratory 10 to 200?000 12 to 18 ?Measurement of Static (Non-Flowing) Samples ?μS/cm Test Method...

ASTM G205-23 - Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
December 1, 2023 - ASTM International

5.1 In the absence of water, the crude oil is noncorrosive. However, trace amounts of water and sediment have the potential to create corrosive situations during crude oil handling or transport if such materials accumulate and persist on steel surfaces. Test Methods D473 and D4006 provide...

ASTM D5391-23 - Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
April 1, 2023 - ASTM International

5.1 Conductivity measurements are typically made on samples of moderate to high ionic strength where contamination of open samples in routine laboratory handling is negligible. Under those conditions, standard temperature compensation using coefficients of 1 to 3?% of reading per degree...

DS/EN 17246 - Fertilizers – Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
August 27, 2019 - DS

This document specifies a method for the determination of traces of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD).

ASTM C518-21 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
September 1, 2021 - ASTM International

4.1 This test method provides a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. 4.2 Proper calibration of the heat flow meter apparatus requires...

ASTM D4306-20 - Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
May 1, 2020 - ASTM International

1.1 This practice2 covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. 1.2 The values stated in SI units are to be regarded as standard. No other units of...

ASTM D7833-20 - Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
June 1, 2020 - ASTM International

5.1 The hydrocarbon component distribution of gaseous mixtures is often required for end-use sale of this material. Applications such as chemical feedstock or fuel require precise compositional data to ensure uniform quality. Trace amounts of some hydrocarbon impurities in these materials...

ASTM C696-19 - Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
November 1, 2019 - ASTM International

1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade uranium dioxide powders and pellets to determine compliance with specifications. 1.2 Units-The values stated in SI units are to be regarded as standard. The values given in...

ASTM D2791-19 - Standard Test Method for On-Line Determination of Sodium in Water
December 15, 2019 - ASTM International

1.1 This test method covers the on-line determination of trace amounts of sodium in water using an ion-selective electrode. 1.2 This test method is based on on-line application of the sodium ion electrode as reported in the technical literature (1-3).2 It is generally applicable over the...

ASTM D6432-19 - Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
November 15, 2019 - ASTM International

5.1 Concepts-This guide summarizes the equipment, field procedures, and data processing methods used to interpret geologic conditions, and to identify and provide locations of geologic anomalies and man-made objects with the GPR method. The GPR uses high-frequency EM waves (from 10 to 3000 MHz) to...

ASTM C968-19 - Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
September 1, 2019 - ASTM International

1.1 These test methods cover procedures for the analysis of sintered gadolinium oxide-uranium dioxide pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Section Carbon (Total) by Direct Combustion-Thermal Conductivity Method 2...

ASTM C1114-06(2019) - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
March 1, 2019 - ASTM International

5.1 Factors that may influence the thermal-transmission properties of a specimen of material are described in Practice C1045 and the Precision and Bias section of Test Method C177. 5.2 Because of the required test conditions prescribed by this test method, it shall be recognized that the thermal...

Advertisement