5.1 PN Junction Diode-The steady-state photocurrent of a simple p-n junction diode is a directly measurable quantity that can be directly related to device response over a wide range of ionizing radiation. For more complex devices, the junction photocurrent may not be directly related to device...
1.1 This practice sets forth requirements to ensure consistency in neutron-induced displacement damage testing of silicon and gallium arsenide electronic piece parts. Controls on facility, dosimetry, tester, and communications processes that affect the accuracy and reproducibility of these tests...
1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...
1.1 This guide covers recommended procedures for the use of X-ray testers (that is, sources with a photon spectrum having ˜10 keV mean photon energy and ˜50 keV maximum energy) in testing semiconductor discrete devices and integrated circuits for effects from ionizing radiation. 1.2 The X-ray...
5.1 Many modern integrated circuits, power transistors, and other devices experience SEP when exposed to cosmic rays in interplanetary space, in satellite orbits, or during a short passage through trapped radiation belts. It is essential to be able to predict the SEP rate for a specific...
4.1 Flash X-ray facilities provide intense bremsstrahlung radiation environments, usually in a single sub-microsecond pulse, which often fluctuates in amplitude, shape, and spectrum from shot to shot. Therefore, appropriate dosimetry must be fielded on every exposure to characterize the...
1.1 This guide strictly applies only to the exposure of unbiased silicon (Si) or gallium arsenide (GaAs) semiconductor components (integrated circuits, transistors, and diodes) to neutron radiation to determine the permanent displacement damage in the components. Validated 1-MeV displacement...
1.1 This test method covers the continuous determination of pH of water by electrometric measurement using the glass, the antimony or the ion-selective field-effect transistor (ISFET) electrode as the sensor. 1.2 This test method does not cover measurement of samples with less than 100 μS/cm...
1.1 These requirements apply to semiconductor devices of the isolated-mounting type - thyristors, transistors, diodes, and the like, and hybrid modules consisting of combinations of these devices. 1.2 The term isolation, as used in this standard, refers to the isolation of the mounting...
1.1 This guide provides illustrations of radiographs of semiconductors and related devices. Low powered transistors (through the TO-11 case configuration), diodes, low-power rectifiers, power devices, and integrated circuits are illustrated with common assembly features. Particular areas of...
Scope. This specification covers the performance requirements for NPN, silicon, power transistor. Three levels of product assurance are provided for each device type (JAN, JANTX, and JANTXV).
Scope. This specification covers the performance requirements for unitized, dual transistors which contains a pair of electrically isolated matched and unmatched NPN, silicon transistors in one package. Four levels of product assurance are provided for each device type as specified in...
Scope. This specification covers the performance requirements for NPN, silicon, high-speed switching transistor. Two levels of product assurance (JAN and JANTX) are provided for all encapsulated devices.
Scope. This specification covers the performance requirements for NPN, silicon, switching, medium power transistors. One level of product assurance (JAN) is provided for all encapsulated devices.
Scope. This specification covers the performance requirements for a N-channel, enhancement-mode, MOSFET, power transistor intended for use in high density power switching applications. Four levels of product assurance (JAN, JANTX, JANTXV, and JANS) are provided for each encapsulated device....
Scope. This specification covers the performance requirements for a P-Channel, enhancement-mode, MOSFET, radiation hardened, power transistor. Two levels of product assurance (JANTXV and JANS) are provided for each device type as specified in MIL-PRF-19500, with avalanche energy maximum...
Scope. This specification covers the performance requirements for an N-channel, enhancement-mode, MOSFET, power transistor. Four levels of product assurance (JAN, JANTX, JANTXV, and JANS) are provided for each encapsulated device. Two levels of product assurance (JANHC and JANKC) are...
Scope. This specification covers the performance requirements for a P-channel, enhancement-mode, radiation hardened (total dose and single event effects (SEE)), low-threshold logic level, MOSFET, transistor.
Scope. This specification covers the performance requirements for N-channel, enhancement mode, MOSFET, power transistors. These transistors are intended for use in high density power switching applications and include ratings for avalanche energy (EAR and EAS) and avalanche current...
Scope. This specification covers the performance requirements for an N-channel, enhancement-mode, MOSFET, power transistor intended for use in high density power switching applications. Four levels of product assurance (JAN, JANTX, JANTXV, and JANS) are provided for each encapsulated device...
Narrow Your Results