This specification covers minimum-wall-thickne
1.1 This specification covers minimum-wall-thickne
This standard covers the double flare of the steel pipe for automobile tubing (herein after referred to as tubing), and tube fittings that are connected to and used with the tubing.
1.1 This specification covers drawn seamless tubes in straight lengths and coils for general purpose and pressure applications in alloys (Note 2), tempers, and thicknesses shown in Table 2 [Table 3]. Coiled tubes are generally available only as round tubes with a wall thickness...
This specification covers standards for minimum-wall-thickne
This specification covers minimum-wall-thickne
This specification covers nominal-wall-thickne
1.1 This specification2 covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2. 1.2 Grades containing the letter, H, in their designation, have requirements different from those...
The specification covers grades of stainless steel tubing for general corrosion-resisting and low or high-temperature service. The tubes shall be cold finished and shall be made by the seamless or welded process. All material shall be furnished in the heat-treated condition. The...
This specification covers carbon and low alloy steel tubes. Steel samples shall be melt processed and shall either be ingot cast or strand cast. Heat and product analyses shall be performed on the steel materials. Steel specimens shall also undergo tensile tests and shall conform to required...
This specification covers carbon and low alloy steel tubes. Steel samples shall be melt processed and shall either be ingot cast or strand cast. Heat and product analyses shall be performed on the steel materials. Steel specimens shall also undergo tensile tests and shall conform to required...
1.1 This specification covers tantalum and tantalum alloy seamless and welded tubes of the following grades: 1.1.1 UNS Grade R05400-Unalloyed tantalum, powder-metallurgy consolidation, 1.1.2 UNS Grade R05200-Unalloyed tantalum, vacuum melted, 1.1.3 UNS Grade R05252-Tantalum?+?2.
This specification covers carbon and low alloy steel tubes. Steel samples shall be melt processed and shall either be ingot cast or strand cast. Heat and product analyses shall be performed on the steel materials. Steel specimens shall also undergo tensile tests and shall conform to required...
This procedure is used to determine the integrity of longitudinal extrusion weld-lines on aluminum extrusion structural / porthole tubes.
This specification covers general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes. The steel shall made by any process. The material shall conform to the tensile property requirements prescribed in the individual product specification. Yield strength...
Narrow Your Results