1.1 This specification covers Chromium-Molybdenum-
1.1 This specification covers tungsten-type and molybdenum-type high-speed steels available as annealed, hot-rolled bars, forgings, plate, sheet, or strip, and annealed, cold-finished bars or forgings used primarily in the fabrication of tools. 1.2 Seven types of...
1.1 This specification covers Chromium-Molybdenum-
This specification covers Chromium-Molybdenum-
MPIF Standard 35 is issued to provide the design and materials engineer with the information necessary for specifying powder metallurgy (PM) materials that have been developed by the PM parts manufacturing industry. This section of Standard 35 deals with products manufactured by powder forging (PF)...
1.1 This specification covers Chromium-Molybdenum-
1.1 This specification covers Chromium-Molybdenum-
This specification covers a group of common requirements that apply to rolled steel plates for pressure vessels. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace process. Sampling and methods for chemical analysis are discussed. Yield strength...
This SSTD provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of ASTM A514 Grade B (UNS No. K11630) high-strength (tensile strength of 110,000 psi or more) steel plate (also known as T-1 steel) up to...
PURPOSE This John C. Stennis Space Center (SSC) Standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of austenitic stainless steel pipe or plate from 0.063-inch to 1.500-inch wall thickness...
APPLICABILITY a. This SSTD is valid for welding of ASTM A333, Grade 3 steel pipe or plate that will be used in, but not be limited to, nitrogen, helium, air, oxygen and hydrogen service. b. This SSTD applies to all contractor and subcontractor personnel involved with the GTAW welding...
This specification covers a group of common requirements that apply to rolled steel plates for pressure vessels. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace process. Sampling and methods for chemical analysis are discussed. Yield strength...
These methods of determination of average grain size in metallic materials are primarily measuring procedures and, because of their purely geometric basis, are independent of the metal or alloy concerned. In fact, the basic procedures may also be used for the estimation of average grain, crystal,...
These methods of determination of average grain size in metallic materials are primarily measuring procedures and, because of their purely geometric basis, are independent of the metal or alloy concerned. In fact, the basic procedures may also be used for the estimation of average grain, crystal,...
Narrow Your Results