loading
ISO 9981 - Belt drives — Pulleys and V-ribbed belts for the automotive industry — PK profile: Dimensions
June 1, 2020 - ISO

This document specifies the principal dimensional characteristics of V-ribbed pulley groove profiles, together with the corresponding endless V-ribbed belts of PK profile which are used predominantly for automotive accessory drive applications. This document does not apply to...

ASABE S211 - V-Belt and V-Ribbed Belt Drives for Agricultural Machines
July 1, 2017 - ASABE

This Standard establishes acceptable manufacturing tolerances, methods of measuring, and proper application for drives using V-belts or V-ribbed belts. They may be used individually or in matched sets. This Standard is unique to agricultural belt drives and should...

JIS B 1860 - Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary
September 20, 2018 - JSA

This Standard defines terms relating to general-use seamless V-belts, V-ribbed belts, V-grooved pulleys and V-ribbed pulleys that are intended for power transmission. NOTE The International Standard corresponding to this Standard and the symbol of degree of...

JIS B 1862 - Belt drives—V-ribbed pulleys and belts—PK profile: Dimensions
June 20, 2019 - JSA

This Standard specifies the principal dimensional characteristics of groove profiles of V-ribbed pulleys (hereafter referred to as pulleys), together with those of the corresponding V-ribbed belts (hereafter referred to as belts) of PK profile which are used...

ISO 5294 - Synchronous Belt Drives - Pulleys
December 1, 2012 - ISO

This International Standard specifies the principal characteristics of synchronous pulleys for use in synchronous endless belt drives for mechanical power transmission and where positive indexing or synchronization is required. NOTE These drives have been known under various names in the...

ISO 9982 - Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - Dimensions - PH, PJ, PK, PL and PM Profiles: Dimensions
June 15, 1998 - ISO

This International Standard specifies the principal dimensional characteristics of V-ribbed pulley groove profiles, together with the corresponding endless V-ribbed belts, of PH, PJ, PK, PL and PM profiles which are used for general industrial applications. The PK belt...

ISO 5288 - Synchronous Belt Drives - Vocabulary
December 1, 2017 - ISO

This document specifies the terms and definitions related to the use of synchronous belt drives for mechanical power transmission and where positive indexing or synchronization is required.

JASO E109 - Automotive parts - V-ribbed pulley grooves and belts - Dimensions
January 1, 2011 - JSAE

This standard specifies the shapes and dimensions of the grooves of the V-ribbed pulleys (hereinafter referred to as "pulley") corresponding to the PK profile V-ribbed belts (hereinafter referred to as "belt") which are used for automobiles to transfer the power, and...

ISO 21342 - Synchronous belt drives — Automotive belts and pulleys
May 1, 2019 - ISO

This document specifies the characteristics of synchronous endless belts and their related pulleys for use in automotive applications such as engine camshaft drives. The characteristics include: - belt pitch spacing; - belt nominal tooth dimensions; - belt width and...

GMW15478 - Seat Belt Webbing - Polyester
October 1, 2019 - GMW

Purpose. This specification establishes the webbing requirements for 2-point seat belt assemblies used in GM vehicles. It defines key physical and functional requirements that are intended to drive commonality across GM vehicles worldwide and interchangeability between suppliers' systems...

GM2732M - Label – Seat Belt Webbing
June 1, 2012 - GMNA

This specification covers the properties and test requirements of a seat belt label suitable for attaching to seat belt webbing by means of stitching.

JIS B 1861 - V-belts and V-ribbed belts - Test method for determination of centre distance variation
October 20, 2016 - JSA

This Standard specifies a test method for determining the centre distance variation of classical V-belts specified in JIS K 6323, narrow V-belts specified in JIS K 6368, and V-ribbed belts specified in JIS B 1858. NOTE: The International Standard...

BS AU 185 - Seat Belt Booster Cushions
January 31, 1983 - BSI

Requirements for booster cushions for use with an approved adult lap or lap and diagonal seat belt or child safety harness by persons of small stature of mass 15 kg or more to improve the fit of the seat belt.

ISO 254 - Belt drives — Pulleys — Quality, finish and balance
November 15, 2011 - ISO

This International Standard specifies the characteristics of quality which are common to all transmission pulleys. It establishes specific quality levels for the finish and balance of transmission pulleys and test pulleys. This International Standard is applicable to transmission pulleys for...

GMW14310 - Belt Assembly - Structural Loading
August 1, 2015 - GMW

Purpose. To statically evaluate the structural performance of each component of the safety belt assembly. This procedure is intended to evaluate each component of the safety belt assembly with respect to the static structural performance and propensity to cut webbing. Included in this...

MIL-B-1462 - BELT, GENERAL OFFICER'S
January 6, 1988 - NPFC

This document covers a leather belt for general officers.

FORD CX9 - FLAT BELT CONVEYORS
June 1, 1992 - FORD

1. SCOPE: This standard covers flat belt conveyors used for moving containers and parts.

GMKOREA EDS-T-5222 - RELAY, SEAT-BELT LOGIC
October 21, 2008 - GMKOREA

PURPOSE Following test specification determines the function values and fatigue test conditions for the relay, seat-belt logic.

JIS B 1859 - Synchronous belt drives— Vocabulary
August 20, 2020 - JSA

This Standard specifies the terms and definitions related to the use of synchronous belt and synchronous pulley for mechanical power transmission and where positive indexing or synchronization is required. NOTE The International Standard corresponding to this Standard and the symbol of...

MIL-B-29378 - BELT, MAN'S: CEREMONIAL, OFFICERS
February 28, 1994 - NPFC

This specification covers the minimum requirements for a poromeric waist belt with detachable and adjustable shoulder strap.

Advertisement