loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
ASTM D6908-25 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
September 1, 2025 - ASTM International

1.1 This practice covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, continuous monitoring particulate light scatter techniques, and TOC monitoring tests for the purpose of...

ASTM D4188-17(2025) - Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
December 1, 2025 - ASTM International

1.1 This practice covers the procedure used to perform pressure in-line coagulation-flocculation-filtration of water and waste water. It is applicable to water and waste water with relatively low suspended solids (<30 mg/L). The practice is applicable for any size...

ASTM D6908-06(2017) - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
December 1, 2017 - ASTM International

1.1 This practice covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, continuous monitoring particulate light scatter techniques, and TOC monitoring tests for the purpose of...

DEF STAN 68-202 - Diatomaceous Earth for Water Filtration Equipment
June 22, 2001 - MODUK

This standard specifies requirements for a grade of diatomaceous earth (kieselguhr) suitable for use in water filtration equipment.

ASTM D4520-18(2026) - Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
May 1, 2026 - ASTM International

1.1 This practice covers a procedure for conducting on-site core flood tests to determine the filtration and chemical treatment requirements for subsurface injection of water. 1.2 This practice applies to water disposal, secondary recovery, and enhanced oil recovery projects...

MIL-C-21963 - CORNSTARCH, TECHNICAL (BOILER WATER FILTRATION)
NPFC
A description is not available for this item.
ASTM D8649-26 - Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
May 1, 2026 - ASTM International

5.1 Pesticides may be used in various agricultural and household products. These products may enter waterways at low levels through run-off or misuse near water resources. Hence, there is need for a quick, easy, and robust method to determine pesticide concentration in water matrices...

ASTM D8193-26 - Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
May 15, 2026 - ASTM International

1.1 This test method covers the determination of total oil and grease (TOG) that can be extracted from water or wastewater samples by cyclohexane and measured by non-dispersive IR spectroscopy from 1370?cm-1 to 1380?cm-1. Treating the extract with Florisil to remove polar substances prior to...

ASTM D8607-26 - Standard Test Method for Determination of Selected Elements in Aqueous Solutions by Single Quadrupole Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of dissolved elements in ground waters, surface waters, and drinking water. It may also be used for determination of total recoverable or total element concentrations in these waters as well as wastewater, mine-impacted waters, and digested...

ASTM D1987-22(2026) - Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
June 1, 2026 - ASTM International

5.1 This test method is performance oriented for determining if, and to what degree, different liquids create biological activity on geotextile filters thereby reducing their flow capability. The use of the method is primarily oriented toward landfill leachates but can be performed with any liquid...

ASTM D6908-06 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
July 1, 2006 - ASTM International

1.1 This practice covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, continuous monitoring particulate light scatter techniques, and TOC monitoring tests for the purpose of...

ASTM D6908-05 - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
October 1, 2005 - ASTM International

1.1 This standard covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, and TOC monitoring tests for the purpose of rejecting particles and microbes. The tests are applicable to...

ASTM D6908-06(2010) - Standard Practice for Integrity Testing of Water Filtration Membrane Systems
May 1, 2010 - ASTM International

1.1 This practice covers the determination of the integrity of water filtration membrane elements and systems using air based tests (pressure decay and vacuum hold), soluble dye, continuous monitoring particulate light scatter techniques, and TOC monitoring tests for the purpose of...

NSF 244 - Drinking Water Treatment Units - Supplemental Microbiological Water Treatment Systems - Filtration
August 16, 2020 - NSF

The point-of-use (POU) and point-of-entry (POE) systems addressed by this Standard are designed to be used for the supplemental microbial control of specific organisms that may occasionally be present in drinking water (public or private) because of intermittent incursions. Certain of these...

Advertisement