loading
NFPA PUMP - PUMPS FOR FIRE PROTECTION SYSTEMS
NFPA
A description is not available for this item.
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
ASME CODE PUMPS & VALVES - DRAFT ASME CODE FOR PUMPS AND VALVES FOR NUCLEAR POWER
November 1, 1968 - ASME

The rules of this Code constitute requirements for the design, materials, manufacture, examination, inspection, pressure testing and certification of pumps and valves for use in the nuclear energy system of water cooled commercial nuclear power plants. A nuclear energy system is that...

SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
HI PUMP STANDARDS CD - PUMP STANDARDS
HI/HYDRAUL
A description is not available for this item.
GME B 040 0045 - Water Pump Grease
February 1, 2021 - GME
A description is not available for this item.
UL 778 - Motor-Operated Water Pumps
July 7, 2016 - ULSE

1.1 These requirements cover submersible and nonsubmersible motor-operated pumps intended to be used in ordinary locations in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements do not cover pumps rated more than 600 volts, pumps using universal motors...

GME 06112 - Water Pump - Housing Part-related Material Specification
August 1, 2012 - GME

For water pump housing made of Al- Si casting alloys to GMW5M-Al-C-D-Si9Cu3-F and GD-AlSi12Cu2 (L-2640) to UNE 38-203

DIN EN 16480 - Pumps - Minimum required efficiency of rotodynamic water pumps
July 1, 2017 - DIN

This European Standard specifies performance requirements (methods and procedures for testing and calculating) for determining the Minimum Efficiency Index (MEI) of rotodynamic glanded water pumps for pumping clean water, including where integrated in other products. The...

ASTM D3141/D3141M-21(2026) - Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
June 1, 2026 - ASTM International

This specification covers the properties, sampling, and testing of asphalt suitable for undersealing Portland cement concrete and overlaid concrete pavements by pumping hot asphalt under the slabs. The asphalt shall be homogeneous and free of water and shall conform to the following...

DS/EN 16480 - Pumps – Minimum required efficiency of rotodynamic water pumps
June 27, 2016 - DS

This European Standard specifies performance requirements (methods and procedures for testing and calculating) for determining the Minimum Efficiency Index (MEI) of rotodynamic glanded water pumps for pumping clean water, including where integrated in other products. The...

ASTM D8665-26 - Standard Test Method for Measuring the Gelation Propensity of Automotive Engine Oils After Treatment with Acidified Water
June 1, 2026 - ASTM International

5.1 It is normal for some of the combustion products of an internal combustion engine, such as carbon dioxide, to penetrate the engine oil and be retained in it. 5.2 When an engine is run for a period and then stored over a long period of time, the by-products of combustion might be retained in the...

GMW17741 - Main Engine Electric Water Pump Component Technical Specification (CTS)
March 1, 2017 - GMW

Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This standard stipulates the requirements and validation tests for electric coolant...

UFGS 35 45 03.00 10 - SPEED REDUCERS FOR STORM WATER PUMPS
February 1, 2016 - NAVY

NOTES: This guide specification covers the requirements for speed reducers used with vertical impeller pumps. This section was originally developed for USACE Civil Works projects.

GMSA LTP 215 - Requirement for acceptance of surface defects on Water Pump Body
June 1, 2011 - GMSA

Note: Nothing in this specification supersedes applicable laws and regulations unless a specific exemption has been obtained. Note: In the event of conflict between the portuguese and english, the portuguese language shall take precedence. Purpose Visual Inspection and requirements for acceptance...

Advertisement