loading
HI WATER TREATMENT PLANT - Water Treatment Plant Pumps: Guidelines For Selection, Application, And Operation
January 1, 2017 - HI/HYDRAUL
A description is not available for this item.
SWRI WATER REPELLANT - CLEAR WATER REPELLENT FOR MASONRY
January 1, 1994 - SWRI

This comprehensive manual includes information on clear water repellent materials for both vertical and horizontal surfaces. Also included are a glossary, product comparisons, specifications, monograph and performance test criteria.

WATER TREATMENT PLANT - WATER TREATMENT PLANT DESIGN
AWWA
A description is not available for this item.
NSF WATER ADDITIVE SET - DRINKING WATER ADDITIVE SET - STANDARDS 60 AND 61
NSF
A description is not available for this item.
NFPA 214 - Standard on Water-Cooling Towers
January 1, 2021 - NFPA

This standard applies to fire protection for field-erected and factory-assembled water-cooling towers of combustible construction or those in which the fill is of combustible material. Purpose. The purpose of this standard is to provide a reasonable degree of protection for life and...

CTI ATC-105 - Acceptance Test Code for Water Cooling Towers
February 1, 2019 - CTI

This Code covers the determination of the thermal capability of water cooling towers. Purpose The purpose of this Code is to describe instrumentation and procedures for the testing and performance evaluation of water cooling towers.

ASTM D8384-25 - Standard Practice for Extraction of Water-Soluble Amines from Crude Oils
July 1, 2025 - ASTM International

1.1 This practice covers a procedure for extraction of water-soluble amines in crude oil for subsequent measurement by undefined analytical techniques. This practice is applicable to crude oils and is intended to provide guidance on water washing crude oil for optimal recovery of...

ASTM E645-25 - Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
February 1, 2025 - ASTM International

5.1 This practice determines potentially effective microbicides for use in cooling water systems using cooling water and deposits/biofilm obtained from the field. The addition of deposits/biofilms addresses the need to include the major source of microorganisms in cooling water...

ASTM C515-24 - Standard Specification for Chemical-Resistant Ceramic Tower Packings
September 1, 2024 - ASTM International

1.1 This specification covers fired ceramic shapes formed from naturally occurring clays and from compounded bodies that are used as packing in tower installations. These ceramic units are designed primarily for use in process equipment for the chemical or allied industries. 1.2 The physical...

TIA/ASSE COMM TOWER SET - Loading, Analysis, Design Criteria, and Safety Practices for the Construction, Demolition, Alteration and Maintenance of Communication Structures
August 22, 2016 - TIA

This set contains: TIA-322 The scope of this Standard is limited to providingengineering criteria to evaluate strength and stability requirements related tothe installation, alteration and maintenance of communication structures, basedon construction loads as defined in a rigging plan prepared in...

CTI BUL-109 - Nomenclature for Industrial Water-Cooling Towers
July 1, 2015 - CTI
A description is not available for this item.
CTI ATC-128 - Test Code for Measurement of Sound from Water-Cooling Towers
February 1, 2014 - CTI

This code applies to wet and wet/dry (parallel path), open and closed circuit cooling towers, mechanical or natural draft. The equipment being tested is the cooling tower consisting of the structure (individual cell or tower) with the heat exchange surface, water...

ASTM D8125-24 - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
June 1, 2024 - ASTM International

1.1 This specification covers re-refined engine oil bottoms, also known as vacuum tower asphalt extender, that may be used in formulating asphalt for pavement construction and roofing. This specification has been developed specifically for these two categories of product and is not intended...

ASHRAE OR-16-C019 - Filtration Selection for Cooling Tower Water
January 1, 2016 - ASHRAE

INTRODUCTION It is well documented (Oranski 2012) that there are many benefits to continuously removing dirt from HVAC water systems. However, the debate on how to apply, how much to apply, and what type of filtration continues. This paper will compare on a broad scale the advantages and...

CTI CHAPTER 4 - RECOMMENDATIONS FOR WINTER OPERATION OF WATER COOLING TOWERS
September 1, 2010 - CTI

INTRODUCTION This Cooling Technology Institute (CTI) publication is intended to provide guidelines for winter operation of industrial water cooling towers, and represents the consensus of both manufacturers and users throughout the industry, with a wide range of experience in this...

ASTM E1796-24 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
March 1, 2024 - ASTM International

1.1 This guide is intended to provide building users such as private building owners, contractors, architects, homeowners, and regulatory authorities with assistance in selecting an appropriate liquid coating encapsulation product for architectural residence and child-care facility use situations...

ASTM C1617-24 - Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel
May 1, 2024 - ASTM International

5.1 Results from this accelerated corrosion test shall not be considered as an indicator of the useful life of the metal equipment. Many factors need consideration for applicability to specific circumstances. Refer to Guide C1696 and Practice G31 for additional information. 5.2 Corrosion associated...

Advertisement