5.1 The measurement of the resistance to abrasion of textile webbing is very complex. The resistance to abrasion is affected by many factors that include the inherent mechanical properties of the fibers; the dimensions of the fibers; the structure of the yarns; the construction of the...
1.1 This practice primarily covers greige tapes and webbings woven from "E" electrical classification glass fiber yarns. This practice can also be applied to tapes and webbings made of other glass fiber grades upon agreement between the purchaser and the supplier. 1.2 This practice is...
1.1 This test method covers the determination of the breaking strength and elongation of textile webbing, tape and braided materials using a split-drum type specimen clamp. 1.2 This test method is limited to materials with a maximum width of 90 mm (3.5 in.) and a maximum breaking strength of...
This specification specifies the minimum strength requirements for anchorages permanently installed or attached to training towers or other structures used for rope rescue training. It specifies the design loads that must be considered and does not describe how those anchorages are constructed,...
Scope. This specification covers woven nylon, textile webbing.
Scope. This specification covers various types of textile, elastic cotton webbing.
Scope. This standard specifies a yarn color code to provide a means for the positive identification of manufacturers of certain types of nylon webbing. This code is intended to apply only to nylon webbings. Purpose. The purpose of this standard is to identify manufacturers of certain...
This document applies to webbing used on occupant restraint systems in service on 14 CFR/CS part 23, part 25, part 27, and part 29 aircraft applications. The guidelines presented within this document are intended to be supplemental to the requirements supplied by the OEM in the CMM, ICA, or...
1.1 This test method covers the determination of abrasion resistance of textile webbing using a hex bar abrasion tester. 1.1.1 The resistance is expressed as a percentage of retained breaking strength. 1.2 The values stated in SI units are to be regarded as standard. The values given in...
Purpose. This specification establishes the webbing requirements for 2-point seat belt assemblies used in GM vehicles. It defines key physical and functional requirements that are intended to drive commonality across GM vehicles worldwide and interchangeability between suppliers' systems...
Scope. This specification covers flexible, lightweight cargo net slings made of nylon webbing. This specification does not cover cargo net slings used for handling ordnance, weapons, and explosives (that includes underway replenishment missions) which are specified in NAVSEA Drawing...
Scope. This specification covers the requirements for a cotton, general purpose webbing, natural or in colors.
The materials defined by these specifications are seat belt webbings woven with either twisted or untwisted continuous filament yarns and finished selvages and may have a monofilament reinforcement. Proper dyes and dyeing procedures shall be employed, the yarns may be spun dyed or the...
The materials defined by these specifications are seat belt webbings woven with either twisted or untwisted continuous filament yarns and finished selvages and may have a monofilament reinforcement. Proper dyes and dyeing procedures shall be employed, the yarns may be spun dyed or the...
The materials defined by these specifications are seat belt webbings woven with either twisted or untwisted continuous filament yarns and finished selvages and may have a monofilament reinforcement. Proper dyes and dyeing procedures shall be employed, the yarns may be spun dyed or the...
This standard establishes requirements for the performance, design, marking, qualification, instruction, training, test methods, inspection, use, maintenance and removal from service of full body harnesses (FBH). FBHs are used for fall arrest, positioning, travel restraint, suspension and/or rescue...
Scope. This document covers textured or multifilament nylon webbing used for individual equipment belts and load carrying equipment.
Scope. This specification covers cotton webbing trouser belts with attached end clips for wear by male and female personnel.
1.1 This test method covers the determination of abrasion resistance of textile webbing using a hex bar abrasion tester. 1.1.1 The resistance is expressed as a percentage of retained break strength. 1.2 This standard does not purport to address all of the safety concerns, if any, associated...
This specification covers the requirements for woven nylon webbing (woven on shuttle or shuttleless looms).
Narrow Your Results