loading
ASTM WELDING - ASTM STANDARDS FOR WELDING
ASTM
A description is not available for this item.
WIRELESS CONTROL FOUNDATI - Wireless Control Foundation: Continuous and Discrete Control for the Process Industry
January 1, 2015 - ISA

In this book, the authors address the wireless communication concepts and terminology that are needed to apply wireless control in the process industry. The control system interfaces and wireless field devices described in this book are based on wireless standards for industrial settings and can be...

IEEE WIRELESSMAN - Inside the IEEE 802.16 Standard for Wireless Metropolitan Area Networks
January 1, 2006 - IEEE
A description is not available for this item.
IEEE WIRELESS DICTIONARY - Wireless Dictonary
January 1, 2005 - IEEE
A description is not available for this item.
IEEE WIRELESS COMM STANDS - A Study of IEEE 802.11, 802.15, and 802.16
January 1, 2004 - IEEE
A description is not available for this item.
IEEE WIRELESS MULTIMEDIA - A Guide to the IEEE 802.15.3 Standard
January 1, 2004 - IEEE
A description is not available for this item.
IEEE WIRELESS COMMUNICAT - WIRELESS COMMUNICATIONS: PRINCIPLES AND PRACTICE
IEEE
A description is not available for this item.
WIRELESS/MOBILE CD - WIRELESS/MOBILE STANDARDS COLLECTION
IHS
A description is not available for this item.
IHS WIRELESS STANDARDS - WIRELESS STANDARDS COLLECTION
IHS
A description is not available for this item.
ASTM A884/A884M-25 - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
September 1, 2025 - ASTM International

1.1 This specification covers plain and deformed steel wire and plain and deformed steel welded wire reinforcement with protective epoxy coating. A Class A minimum coating thickness is required for wire and welded wire reinforcement intended for use in...

ASTM C933-23 - Standard Specification for Welded Wire Lath
October 1, 2023 - ASTM International

This specification covers welded wire lath, flat or self-furring, with or without backing, designed for use as a base to receive Portland cement-based interior plaster and exterior stucco. Welded wire lath shall be fabricated from cold-drawn, galvanized steel...

ASTM A1064/A1064M-24 - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
April 15, 2024 - ASTM International

1.1 This specification covers carbon-steel wire and welded wire reinforcement produced from hot-rolled rod to be used for the reinforcement of concrete. The steel wire is cold-worked, drawn or rolled, plain (non-deformed, as-drawn or galvanized), or deformed....

USCAR38-2 - PERFORMANCE SPECIFICATION FOR ULTRASONICALLY WELDED WIRE TERMINATIONS
July 11, 2023 - SAE International

This specification defines test methods and performance criteria for ultrasonically welded wire-to-terminal bonds as shown in Figure 1 . This specification subjects parts to environmental exposures to simulate a lifetime of field exposure for a road vehicle. Exposures referenced in...

AMS4189K - Aluminum Alloy Welding Wire 4.1Si - 0.20Mg (4643)
April 14, 2022 - SAE International

This specification covers an aluminum alloy in the form of welding wire.

AMS4245G - Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)
May 10, 2023 - SAE International

This specification covers an aluminum alloy in the form of welding wire.

AMS4190L - Aluminum Alloy, Welding Wire 5.2Si (4043)
December 1, 2021 - SAE International

This specification covers an aluminum alloy in the form of welding wire (see 8.6 ).

AMS4954L - Titanium Alloy, Welding Wire 6Al - 4V
May 24, 2022 - SAE International

This specification covers a titanium alloy in the form of wire for welding filler metal.

Advertisement