NOTE: This guide specification covers requirements for wood doors.
This Standard provides minimum requirements for the material characteristics and the fabrication of wood frames for doors with or without attached wood frames, i.e., sidelights and transoms.
General This Standard specifies minimum requirements for stile and rail wood doors. The Standard provides definitions, tolerances, sizes, construction, types of doors, detailed requirements, grading, and testing methods. Note: This extract from CSA Standard O132.2-M1977 does...
Preface This is the first consolidated edition of the 0132.2 Series on wood flush doors. It supersedes Clause 1 Scope, Clause 2 Definitions, Clause 3 Flush Doors, and Clause 5 Glue Line Requirements for Wood Doors of CSA Standard O1 32.2-M1977 Wood...
For external doors opening inwards and outwards, and for internal door frames and linings. For frames with wing lights the window portion is required to comply with BS 644-1. Frames for fire check doors are excluded (BS 459:Part 3). Construction, priming.
5.1 Dry paint often comes in contact with itself especially in window and door areas and, depending on its hardness, the pressure, temperature, humidity, and duration of time the surfaces are in contact, sometimes sticks to itself (blocks). This stringent test method can be used to compare...
1.1 This practice describes a method for selecting samples of building components coated with paints suspected of containing lead. The samples are collected from the debris waste stream created during demolition, renovation, lead hazard control, abatement, or other projects. The samples are...
Fireplace Accessories UL 907 1.1 These requirements apply to fireplace accessories that are intended only for field installation into or attachment to existing masonry fireplaces. Fireplace accessories include items such as heat exchangers, glass door assemblies, and the like. For the...
Specifies requirements for dimensions, materials, quality of manufacture, fittings and marking of a range of external wood doors and frames intended for fitting in locations where compliance with the requirements of the 1966 Load Line Convention is not necessary.
Narrow Your Results