loading
Electrical Installation Work: Level 2: EAL Edition
May 20, 2019 - CRC

Updated in line with the 18th Edition of the Wiring Regulations and written specifically for the EAL Diploma in Electrical Installation, this book has a chapter dedicated to each unit of the EAL syllabus, allowing you to master each topic before moving on to the next. This new edition also includes...

Electrical Installation Work: Level 3: EAL Edition
July 16, 2019 - CRC

Updated in line with the 18th Edition of the Wiring Regulations and written specifically for the EAL Diploma in Electrical Installation, this book has a chapter dedicated to each unit of the EAL syllabus, allowing you to master each topic before moving on to the next. This new edition also includes...

Electrical Installation Work: Level 3: EAL Edition
June 15, 2016 - CRC

The only EAL approved textbook for the Level 3 Diploma in Electrical Installation (600/9331/6) Fully up-to-date with the 3rd Amendment of the 17th Edition IET Wiring Regulations Expert advice that has been written in collaboration with EAL to ensure that it covers what learners need to know...

ASTM E3519-26 - Standard Guide for Recording Serious Incident and Fatality (SIF) Events (Other Than Employee Work-Related Injury and Illness)
May 15, 2026 - ASTM International

1.1 In this guide, criteria are established for recording serious incident and fatality (SIF) events other than work-related SIF injuries and illnesses covered in Guide E2920. Recording and comparing these incidents can aid in continuously improving management systems; identifying and...

ASTM E3034-20(2026) - Standard Guide for Workforce Education in Nanotechnology Pattern Generation
June 1, 2026 - ASTM International

1.1 This guide provides a framework for a basic workforce education in pattern generation topics related to nanotechnology, to be taught at an undergraduate college level. The education should be broadbased, preparing an individual to work in one of many areas in nanotechnology...

ASTM E3001-20(2026) - Standard Practice for Workforce Education in Nanotechnology Characterization
June 1, 2026 - ASTM International

5.1 This practice establishes the basic structure for education in the characterization of nanoscale materials at the undergraduate college level. The approach taken is to classify specific characterization methods into two tiers, with a minimum number of methods to be selected from each...

ASTM E2996-20(2026) - Standard Guide for Workforce Education in Nanotechnology Health and Safety
June 1, 2026 - ASTM International

1.1 This guide provides a framework for basic workforce education in health and safety topics related to nanotechnology, to be taught at an undergraduate college level. This education should be broad to prepare an individual to work safely within one of the many areas in...

ASTM E3168-20a(2026) - Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
July 1, 2026 - ASTM International

4.1 This practice is used to evaluate the ability of a radiographic interpreter to discriminate low contrast slit images in a radiographic interpretation environment. A radiographic viewer, as described in Specification E1390, and a viewing environment, as described in Guide E94/E94M, are strongly...

ASTM D7826-26 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
May 1, 2026 - ASTM International

1.1 This guide provides procedures to develop data for use in research reports for new aviation gasolines or new aviation gasoline additives. 1.2 This data is intended to be used by the ASTM subcommittee to make a determination of the suitability of the fuel for use as an aviation fuel in either a...

ASTM G225-26 - Standard Practice for Electrochemical Measurement of Corrosion Rate of Metals in Field Concrete Structures
May 15, 2026 - ASTM International

1.1 This practice covers two methods to determine the corrosion rate of steel in field and large concrete structures, that cannot be currently obtained by the current corrosion methods, Test Methods C876 and G59. The in-field measurement of the corrosion current in existing concrete structures is...

ASTM D7034-26 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
April 1, 2026 - ASTM International

5.1 Although cabin air quality has been measured on numerous occasions and in many studies, there is very little guidance available for interpreting such data. Guidance for identifying contaminants and associated exposure levels that would cause concern in aircraft cabins is very limited....

ASTM E1838-26 - Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
April 1, 2026 - ASTM International

5.1 This in vivo procedure is designed to test the ability of hygienic handwash and handrub agents to reduce levels of selected infectious viruses from experimentally contaminated fingerpads of adults. Since the two thumbpads and all eight fingerpads can be contaminated with virus and used...

ASTM D5810-96(2026) - Standard Guide for Spiking into Aqueous Samples
May 1, 2026 - ASTM International

1.1 This guide covers the general technique of "spiking" a broad range of materials into aqueous media. This guide will serve the analyst in preparing spiked samples for quality control purposes. Guidance is also provided to aid the analyst in calculating recoveries and interpreting results. It is...

ASTM E2276-26 - Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
March 1, 2026 - ASTM International

5.1 This in vivo procedure is designed to test the ability of hygienic handwash or handrub agents to eliminate selected types of bacteria from experimentally contaminated skin of the hands of adult subjects. Since the two thumbpads and all eight fingerpads can be used in any given test, it allows...

ASTM F1449-20(2026) - Standard Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
May 1, 2026 - ASTM International

5.1 This guide identifies the responsibilities of the fiber, fabric, and clothing manufacturers, as well as the processor, the processor's chemical supplier, and the end user. 5.2 This guide describes the key components involved in an industrial laundry program for the care and maintenance of flame...

ASTM E2271/E2271M-26 - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
April 1, 2026 - ASTM International

4.1 A clearance examination of abatement areas and other areas associated with other lead-hazard control activities, or building maintenance or modification activities in multifamily dwellings having similar units, common areas or exterior sites is performed to determine that the clearance area is...

ASTM E2111-26 - Standard Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals using Quantitative Carriers (Quantitative Carrier Test-Tier 1)
March 1, 2026 - ASTM International

5.1 This test method is fully quantitative and it also avoids any loss of viable organisms through wash off, making it possible to produce statistically valid data using many fewer test and control carriers than other quantitative methods based on most probable numbers (MPN). 5.2 The design of the...

ASTM D1143/D1143M-26 - Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
March 15, 2026 - ASTM International

5.1 Field tests provide the most reliable relationship between the axial load applied to a deep foundation and the resulting axial movement. Test results may also provide information used to assess the distribution of side shear resistance along the element, the amount of end bearing developed at...

Advertisement