This document references:
ASME Y14.5 - Dimensioning and Tolerancing
Published by ASME
on
January 1, 2018
INTRODUCTION This Standard establishes symbols, rules, definitions, requirements, defaults, and recommended practices for stating and interpreting dimensioning, tolerancing, and related requirements...
This document references:
ASME Y14.6 - Screw Thread Representation
Published by ASME
on
January 1, 2001
This Standard establishes requirements for pictorial representation, specification, and dimensioning of screw threads on drawings; it is not concerned with standards for dimensional control of screw...
This document references:
FED-STD-H28 - SCREW-THREAD STANDARDS FOR FEDERAL SERVICES
Published by NPFC
on
April 24, 2019
This standard includes the basic screw thread dimensional and acceptability requirements for common screw thread forms and applications. Design and use information are also provided when necessary....
This document is referenced by:
HST-3 - Performance Standard for Lever Hoists
Published by ASME
on
June 6, 2022
(a) This Standard establishes performance requirements for chain, wire rope, and web strap lever hoists for lifting, pulling, and tensioning applications (see Figures 3-0.1-1 through 3-0.1-4). (b)...
This document is referenced by:
MIL-PRF-32307 - VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE
Published by NPFC
on
July 10, 2017
This specification covers triple-offset (see 6.3.4) torque seated (TOTS), quarter turn valves for fuel oil, aviation fuel, lubricating oil, seawater, auxiliary seawater, freshwater, chilled water,...
This document is referenced by:
MIL-DTL-28840E (2) - CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR
Published by DLA
on
September 9, 2022
Scope. This specification covers circular electrical connectors with removable crimp type, front release contacts. These connectors are for use with jacketed cables in shipboard applications....