FORD WE910
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
inactive
Buy Now
| Organization: | FORD |
| Publication Date: | 10 January 2001 |
| Status: | inactive |
| Page Count: | 6 |
scope:
1. SCOPE
This standard gives the general and dimensional requirements for hexagon (M4 -M24), flanged hexagon (M5 -M20), and hexagon thin nuts (M4 -M24). NOTE: The dimensions specified in Table 1 are not suitable for property classes 9 and 12. The requirements for Nut and Washer Assemblies are specified in WE 901.
Document History
April 22, 2020
GAUGING OF HEXAGON AND HEXAGON FLANGE NUTS
A description is not available for this item.
FORD WE910
January 10, 2001
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
1. SCOPE This standard gives the general and dimensional requirements for hexagon (M4 -M24), flanged hexagon (M5 -M20), and hexagon thin nuts (M4 -M24). NOTE: The dimensions specified in Table 1 are...
October 1, 1996
GAUGING OF HEXAGON AND HEXAGON FLANGE NUTS
A description is not available for this item.
October 1, 1996
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
1. SCOPE. This standard gives the general and dimensional requirements for hexagon (M4 - M24), flanged hexagon (M5 - M20), and hexagon thin nuts (M4 - M24). NOTE: The dimensions specified in Table 1...