FORD - WE910
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
inactive
| Organization: | FORD |
| Publication Date: | 1 October 1996 |
| Status: | inactive |
| Page Count: | 5 |
scope:
1. SCOPE.
This standard gives the general and dimensional requirements for hexagon (M4 - M24), flanged hexagon (M5 - M20), and hexagon thin nuts (M4 - M24). NOTE: The dimensions specified in Table 1 are not suitable for property classes 9 and 12. The requirements for Nut and Washer Assemblies are specified in WE 901.
Document History
April 22, 2020
GAUGING OF HEXAGON AND HEXAGON FLANGE NUTS
A description is not available for this item.
January 10, 2001
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
1. SCOPE This standard gives the general and dimensional requirements for hexagon (M4 -M24), flanged hexagon (M5 -M20), and hexagon thin nuts (M4 -M24). NOTE: The dimensions specified in Table 1 are...
October 1, 1996
GAUGING OF HEXAGON AND HEXAGON FLANGE NUTS
A description is not available for this item.
WE910
October 1, 1996
DIMENSIONAL REQUIREMENTS FOR HEXAGON AND FLANGED HEXAGON NUTS
1. SCOPE. This standard gives the general and dimensional requirements for hexagon (M4 - M24), flanged hexagon (M5 - M20), and hexagon thin nuts (M4 - M24). NOTE: The dimensions specified in Table 1...