loading
ASHRAE APPLICATIONS SI - 2019 ASHRAE Handbook HVAC Applications SI Edition
January 1, 2019 - ASHRAE
A description is not available for this item.
ASHRAE APPLICATION CH 43 - HVAC COMMISSIONING
January 1, 2011 - ASHRAE

Applicability The commissioning process described here applies to new construction, major renovations, and all systems and assemblies. Although this chapter focuses on HVAC, commissioning can be applied to the building as a total system, which includes structural elements, building envelope, life...

NEMA APPLICATION GUIDE AC - APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS
January 1, 2007 - NEMA

This Guide covers AC electrical drive systems, rated 600 volts or less, consisting of three-phase induction motors, voltage source pulse width modulated adjustable frequency controls, and associated components. The Guide addresses common issues that should be considered in the selection of drive...

NEMA APPLICATION GUIDE - Application Guide for Isolated Ground Wiring Devices
January 1, 2002 - NEMA

This application guide covers wiring devices and accessories intended to help protect sensitive equipment from malfunction due to noise on the equipment grounding path. Devices include receptacles, single or duplex with straight blade or locking NEMA configurations, rated 15A to 60A and 125V...

ASHRAE APPLICATIONS CD - ASHRAE HANDBOOK - HVAC APPLICATIONS (I-P & SI EDITION)
ASHRAE
A description is not available for this item.
ASTM D7694/D7694M-18(2026) - Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
May 1, 2026 - ASTM International

1.1 These test methods cover test procedures for prefabricated, reinforced, self-adhesive (SA) polymer-modified bituminous sheet materials designed for single- or multiple-ply application in roofing and waterproofing membranes. 1.2 These test methods specifically address the...

ASTM D1970/D1970M-25 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
December 1, 2025 - ASTM International

1.1 This specification covers polymer modified bituminous sheet materials intended for use as underlayment on roof eaves, or valleys, or both, to prevent leakage of shingle, tile, or metal roofs from water back-up due to ice dams. 1.2 These underlayment sheets have a sticky adhesive layer...

ASTM D4586/D4586M-25 - Standard Specification for Asphalt Roof Cement
December 1, 2025 - ASTM International

1.1 This specification covers asbestos-free asphalt roof cement suitable for trowel application to roofings and flashings. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact...

ASTM D3018/D3018M-25 - Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
November 1, 2025 - ASTM International

This specification covers mineral granule-surfaced asphalt roofing shingles. Covered here are the self-sealing (Type I) and non-self-sealing (Type II) types of shingles. The shingles shall consist of organic felt or glass mat(s) saturated or impregnated, and coated on both sides with a hot...

ASTM D3462/D3462M-25 - Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
November 1, 2025 - ASTM International

This specification deals with the standards for asphalt roofing in shingle form, composed of glass felt or felts impregnated and coated on both sides with asphalt, and surface on the weather side with minerals. Physical requirements of the shingles such as behavior on melting, tear strength,...

ASTM D4586/D4586M-07(2024) - Standard Specification for Asphalt Roof Cement, Asbestos-Free
May 1, 2024 - ASTM International

1.1 This specification covers asbestos-free asphalt roof cement suitable for trowel application to roofings and flashings. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact...

ASTM D6753/D6753M-02(2023) - Standard Specification for Coal Tar Adhesive
July 1, 2023 - ASTM International

This specification covers coal tar adhesive with or without polymer modification suitable for brush, spray, squeegee and trowel application to coal tar built up and coal tar modified bitumen membrane roofings and flashings. The adhesive shall be classified as: Type I and...

ASTM D7530/D7530M-17(2023) - Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer-Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
May 1, 2023 - ASTM International

1.1 This specification covers prefabricated, self-adhesive, glass fiber fabric reinforced, polymer-modified asphalt roll roofing, with granule surfacing, designed for steep slope applications. These products use polymer modifiers in their top and bottom coatings. These products...

ASTM D7505/D7505M-17(2023) - Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer-Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
May 1, 2023 - ASTM International

1.1 This specification covers prefabricated, self-adhesive, polyester fabric reinforced, polymer-modified asphalt surfaced roll roofing products, with granule surfacing, designed for steep slope applications. These products use polymer modifiers in their top and bottom coatings...

Advertisement