loading
ASTM B306-26 - Standard Specification for Copper Drainage Tube (DWV)
March 1, 2026 - ASTM International

1.1 This specification covers the requirements for seamless copper tube (DWV) produced from copper UNS No. C12200 and intended for sanitary drainage, waste, and vent piping. Note 1: Fittings used for soldered or brazed connections in drainage, waste, or vent systems are described in ASME...

ASTM B662/B662M-26 - Standard Specification for Silver-Molybdenum Electrical Contact Material
February 1, 2026 - ASTM International

This specification covers electrical contact components made from silver-molybdenum by powder metallurgical procedures. Chemical analysis of the samples shall be done to determine their chemical composition. The material shall be finished by different methods like braze alloy backing,...

ASTM B302-17(2026) - Standard Specification for Threadless Copper Pipe, Standard Sizes
January 1, 2026 - ASTM International

This specification establishes the requirements for threadless, seamless, and deoxidized copper pipes in straight lengths, in all nominal or standard pipe sizes, for piping systems that are assembled with brazed-joint pipe fittings. The pipe shall be produced from coppers with either UNS No....

ASTM A414/A414M-25a - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
December 1, 2025 - ASTM International

1.1 This specification2 covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices. 1.2 The following grades are included in this...

ASTM A414/A414M-25 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
September 1, 2025 - ASTM International

1.1 This specification2 covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices. 1.2 The following grades are included in this...

ASTM B629-25 - Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
July 1, 2025 - ASTM International

2.1 Molybdenum is used in engineering applications where strength and rigidity of component parts are needed, especially at high temperatures. Its good strength at high temperatures, low vapor pressure, and good impact and creep resistance make it attractive for load-bearing items such as turbine...

ASTM F2014-00(2024) - Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
November 15, 2024 - ASTM International

1.1 This specification covers the pipe materials and dimensions for producing non-reinforced extruded tee connections manufactured by mechanical forming processes. The term "extruded tee connection" applies to butt-weld or socket-weld connections. This specification refers to the forming process...

ASTM F106-24 - Standard Specification for Brazing Filler Metals for Electron Devices
April 1, 2024 - ASTM International

This specification covers brazing filler metals for use in electron devices in a nonoxidizing atmosphere. Material covered by this specification consists of vacuum grade (Grades 1 and 2) brazing filler metals manufactured in the form of strip, wire, or preforms made by blanking the...

ASTM B784-01(2024) - Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
October 1, 2024 - ASTM International

This specification covers bare modified concentric-lay-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead alloy for general use in insulated electrical cables. These conductors shall be constructed with a central core consisting of not more than...

ASTM F1076-19(2024) - Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
July 1, 2024 - ASTM International

1.1 This practice covers expanded welded and silver brazed socket joints for use on shipboard piping systems. 1.2 Expanded welded and silver brazed socket joints are to be used to join two pipes or tubes having the same NPS (see Note 1) without using a fitting or butt weld. 1.3...

ASTM B173-17(2024) - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
October 1, 2024 - ASTM International

This specification covers bare rope-lay-stranded conductors having concentric-stranded members made from round copper wires, either uncoated or coated with tin, lead, or lead-alloy for use as electrical conductors. Coated wires shall include only those wires with finished diameters and densities...

ASTM A414/A414M-24 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
August 15, 2024 - ASTM International

1.1 This specification2 covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices. 1.2 The following grades are included in this...

UL 147B - Nonrefillable (Disposable) Type Metal Container Assemblies for Butane
July 18, 2024 - ULSE

1.1 These requirements cover nonrefillable (disposable) aerosol type metal container assemblies, charged with a commercial grade hydrocarbon fuel gas (primarily butane), constructed, charged, and marked in accordance with Code of Federal Regulations, Title 49, Specification 2P or 2Q. 1.2...

ASTM B369/B369M-24 - Standard Specification for Copper-Nickel Alloy Castings
July 1, 2024 - ASTM International

This specification establishes the requirements for threadless, seamless, and deoxidized copper pipes in straight lengths, in all nominal or standard pipe sizes, for piping systems that are assembled with brazed-joint pipe fittings. The pipe shall be produced from coppers with either UNS No....

AMS2670K - Brazing, Copper
June 20, 2022 - SAE International

This specification covers the requirements for producing brazed joints using copper as the brazing filler metal.

AMS2667H - Brazing, Silver, for Small Pressurized Fittings
May 24, 2023 - SAE International

This specification covers requirements for producing brazed joints in parts fabricated from corrosion- and heat-resistant steels, carbon or low-alloy steels, or copper alloys, and the properties of such joints.

AMS4256D - Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated
December 20, 2023 - SAE International

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in nominal thickness, clad on two sides (see 8.5 ).

AMS4255E - Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet), As Fabricated
December 14, 2023 - SAE International

This specification covers an aluminum alloy in the form of sheet over 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in thickness, clad on one side (see 8.5).

ASTM A414/A414M-23 - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
November 1, 2023 - ASTM International

1.1 This specification2 covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices. 1.2 The following grades are included in this...

ASTM B1003-16(2023) - Standard Specification for Seamless Copper Tube for Linesets
October 15, 2023 - ASTM International

1.1 This specification establishes the requirements for seamless copper tube for linesets intended for use in air conditioning units. The pressure rating established is 700 psi at 250 °F and incorporates fully annealed and brazed copper tubing. 1.2 The tube shall be produced from the...

Advertisement