loading
IEEE CIRCUITS AND FILTERS - THE CIRCUITS AND FILTERS HANDBOOK
IEEE
A description is not available for this item.
ASTM F2100-26 - Standard Specification for Medical Face Masks
February 15, 2026 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing...

ASTM F2100-25 - Standard Specification for Performance of Materials Used in Medical Face Masks
May 1, 2025 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing...

ASTM E2047-10(2025) - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
June 1, 2025 - ASTM International

5.1 The design of a PV module or system intended to provide safe conversion of the sun's radiant energy into useful electricity must take into consideration the possibility of hazard should the user come into contact with the electrical potential of the array. In addition, the insulation system...

ASTM F748-25 - Standard Practice for Selecting Biological Test Methods for Materials and Devices
February 15, 2025 - ASTM International

1.1 This practice describes biological test methods (as listed in 2.1) which may be used in support of a biological evaluation of materials and medical devices according to end-use applications. Biological evaluation is a component of a broader safety evaluation and is conducted...

ASTM F3231/F3231M-24 - Standard Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
October 15, 2024 - ASTM International

This specification applies to the electrical systems aspects of airworthiness and design for "small" aircraft. It establishes the Aircraft Type Code (ATC) compliance matrix based on airworthiness level, number of engines, type of engine(s), stall speed, cruise speed, meteorological conditions,...

ASTM F3502-25 - Standard Specification for Barrier Face Coverings
March 1, 2025 - ASTM International

1.1 This specification is intended to help ensure barrier face coverings meeting the stated requirements provide (1) a means of source control for individual wearers by reducing expelled aerosols from the wearer's nose and mouth into the air; and (2) a degree of particulate filtration that...

ASTM F1564-13(2024) - Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
September 1, 2024 - ASTM International

This specification covers the design testing of mechanical and electrical characteristics of structure-mounted insulating work platforms for electrical workers in conjunction with personal protective equipment while working on energized circuits. This shall include, but not limited to,...

ASTM F2412-24 - Standard Test Methods for Foot Protection
June 1, 2024 - ASTM International

4.1 These test methods contain requirements to evaluate the performance of footwear for the following: 4.1.1 Impact resistance for the toe area of footwear (I), 4.1.2 Compression resistance for the toe area of footwear (C), 4.1.3 Metatarsal protection that reduces the chance of injury to the...

UL 1008M - Transfer Switch Equipment, Meter-Mounted
April 3, 2024 - ULSE

1.1 These requirements cover automatic and non-automatic (manual) transfer switch equipment, operating at 600 V ac less, and intended for installation in a meter base, in ordinary locations only. 1.2 These devices are intended for use in optional standby systems only, and are not intended...

ASTM F3387-23 - Standard Practice for Respiratory Protection
November 1, 2023 - ASTM International

4.1 The purpose of this practice is to provide information and guidance on the proper selection, use, and maintenance of respirators, which will help safeguard the life and health of respirator wearers. This practice is written for all persons concerned with respiratory protection, but...

ASTM F3502-24 - Standard Specification for Barrier Face Coverings
February 1, 2024 - ASTM International

1.1 This specification is intended to help ensure barrier face coverings meeting the stated requirements provide (1) a means of source control for individual wearers by reducing expelled aerosols from the wearer's nose and mouth into the air; and (2) a degree of particulate filtration that...

UL 962A - Furniture Power Distribution Units
July 13, 2023 - ULSE

1.1 These requirements cover indoor use cord and plug connected of permanently connected, furniture power distribution units (FPDU) rated 250 V AC or less and 20 Amperes or less. An FPDU may provide one or more receptacle outlets, inclusive of one current tap integral to the attachment plug, if...

ASTM F2100-23 - Standard Specification for Performance of Materials Used in Medical Face Masks
March 1, 2023 - ASTM International

This specification covers the classifications, performance requirements, and test methods for the materials used in the construction of medical face masks that are used in health care services such as surgery and patient care. Medical face mask material performance is based on testing...

UL 1363 - Relocatable Power Taps
July 13, 2023 - ULSE

1.1 These requirements cover indoor use cord and plug connected, relocatable power taps (RPT) rated 250 V AC or less and 20 Amperes or less. A RPT may include an integral Class 2 power supply with an integral lead and/or connector(s) output. In accordance with the National Electric Code, NFPA 70,...

ASTM F3231/F3231M-23 - Standard Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
January 1, 2023 - ASTM International

This specification applies to the electrical systems aspects of airworthiness and design for "small" aircraft. It establishes the Aircraft Type Code (ATC) compliance matrix based on airworthiness level, number of engines, type of engine(s), stall speed, cruise speed, meteorological conditions,...

ASTM F1507-99(2022) - Standard Specification for Surge Suppressors for Shipboard Use
October 1, 2022 - ASTM International

This specification establishes the performance requirements for surge suppressors used on shipboard ac power circuits that may consist of a single circuit element or may be a hybrid device using several suppression devices. The surge suppressor shall be a protective...

ASTM F3300-23 - Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
May 1, 2023 - ASTM International

5.1 Materials such as engineered thermoplastic films are often used for flexible barrier packaging. However, handling and transportation can cause abrasion to the packaging film and possibly compromise the integrity of the contents (for example, sterility of a medical device). This...

UL 268 - Smoke Detectors for Fire Alarm Systems
June 2, 2023 - ULSE

1.1 This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: a) In Canada only: 1) Standard for the Installation of Fire Alarm Systems, ULC-S524; 2) National Building Code of...

Advertisement