loading
ASTM D6594-26 - Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135?°C
June 1, 2026 - ASTM International

5.1 This test method is intended to simulate the corrosion process of non-ferrous metals in diesel lubricants. The corrosion process under investigation is that believed to be induced primarily by inappropriate lubricant chemistry rather than lubricant degradation or contamination. This test method...

ASTM E2006-22(2026) - Standard Guide for Benchmark Testing of Light Water Reactor Calculations
June 1, 2026 - ASTM International

4.1 This guide deals with the difficult problem of benchmarking neutron transport calculations carried out to determine fluences for plant-specific reactor geometries. The calculations are necessary for fluence determination in locations important for material radiation damage estimation and which...

ASTM D8225-26 - Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
May 1, 2026 - ASTM International

1.1 This test method covers the procedures for preparing, testing, and measuring asphalt mixture cracking resistance using cylindrical laboratory-prepared asphalt mix samples or pavement cores. Testing temperatures are selected from the long-term pavement performance (LTPP) database...

ASTM D7034-26 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
April 1, 2026 - ASTM International

1.1 This guide provides methodology to assist in interpreting results of air quality measurements conducted in aircraft cabins. In particular, the guide describes methodology for assessing the impacts of concentrations for airborne chemical contaminants, based on health and comfort considerations,...

ASTM E1297-26 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
February 1, 2026 - ASTM International

5.1 Refer to Practice E261 for a general discussion of the determination of decay rates, reaction rates, and neutron fluence rates with threshold detectors (1-29). Refer to Practice E1006, Practice E185, and Guide E1018 for the use and application of results obtained by this test method (30-32). 5...

ASTM E2780-10(2026) - Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
January 1, 2026 - ASTM International

5.1 This test method is used for determining emission rates and emission factors for wood heaters. 5.1.1 The emission factor is useful for determining emission performance during product development. 5.1.2 The emission factor is useful for the air quality regulatory community for determining...

ASTM E3140-25 - Standard Guide for Asset Management Career Development, Education, and Training
December 1, 2025 - ASTM International

4.1 The asset management career field has multiple career disciplines (particularly asset management consistent with ISO 55000 definitions, concepts, and requirements) that support an entity's activities. These career titles may include, but are not limited to, industrial asset management...

IEEE PARALLEL DATABASE - PARALLEL DATABASE TECHNIQUES
IEEE
A description is not available for this item.
ASTM D4650-25 - Standard Specification for Normal Butane Thermophysical Property Tables
November 1, 2025 - ASTM International

1.1 The thermophysical property tables for normal butane are for use in the calculation of the pressure-volume-temperature (PVT), thermodynamic, and transport properties of normal butane for process design and operations. Two tables provide properties at the conditions of liquid-vapor equilibrium...

ASTM D4362-25 - Standard Specification for Propane Thermophysical Property Tables
November 1, 2025 - ASTM International

1.1 The thermophysical property tables for propane are used in calculating the pressure-volume-temperature (PVT), thermodynamic, and transport properties of propane for process design and operations. Two tables provide properties at the conditions of liquid-vapor equilibrium (saturation...

ASTM D4483-25 - Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
September 1, 2025 - ASTM International

1.1 This practice covers guidelines for evaluating precision and serves as the governing practice for interlaboratory test programs (ITP) used to evaluate precision for test methods as used in the rubber manufacturing and the carbon black industries. This practice uses the basic one way analysis of...

ASTM D6361/D6361M-98(2025) - Standard Guide for Selecting Cleaning Agents and Processes
August 1, 2025 - ASTM International

1.1 This guide is intended to assist design engineers, manufacturing/industrial engineers, and production managers in selecting the best fit cleaning agent and process. This guide takes into account environmental pollution prevention factors in a selection process. 1.2 This guide is not to be...

ASTM D6245-25 - Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
September 1, 2025 - ASTM International

5.1 Indoor CO2 concentrations have been used as indicators of IAQ for many years, involving both appropriate and inappropriate interpretations of indoor CO2 concentrations (1).5 Appropriate uses include estimating expected levels of occupant comfort in terms of human body odor perception, studying...

ASTM E3035-15(2025) - Standard Classification for Facility Asset Component Tracking System (FACTS)
August 1, 2025 - ASTM International

1.1 This standard (FACTS) establishes a classification of building and sitework elements and components, and their associated functions, attributes, and products. Elements, as defined here, are major assemblies and components common to buildings and sitework. Elements usually perform given...

ASTM E3504-25 - Standard Guide for CERCLA Section 128(a) Response Program Grant Conformance Assessment
July 1, 2025 - ASTM International

1.1 A Brownfield is a property for which redevelopment may be complicated by the presence or potential presence of a hazardous substance, pollutant, or contaminant. CERCLA Section 128(a) grant recipients need defensible, consistent, and reliable policies and procedures to successfully execute these...

ASTM E3462-25 - Standard Guide for Interpretation and Reporting in Forensic Comparisons of Trace Materials
May 1, 2025 - ASTM International

5.1 This guide focuses on a qualitative approach to communicate the significance of an association or exclusion, based on (1) the validated methodology used for the comparison of the items, (2) discrimination capabilities of the analytical scheme, and (3) existing knowledge of how discriminating...

ASTM E3224-25 - Standard Guide for Building Energy Performance and Improvement Evaluation in the Assessment of Property Condition
July 1, 2025 - ASTM International

1.1 Purpose-The purpose of this guide is to define a commercially useful standard in the United States of America for incorporating building energy performance into an assessment of existing property condition, and specifically into a property condition assessment (PCA) on an existing building...

ASTM E3219-25 - Standard Guide for Derivation of Health-Based Exposure Limits (HBELs)
March 15, 2025 - ASTM International

4.1 Guidelines for unintended human exposure to active pharmaceutical ingredients (APIs) are required by various global regulations as part of international quality requirements, needed as good product stewardship, and are considered the industry standard. 4.2 Application of the approach described...

ASTM E2108-25 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
April 1, 2025 - ASTM International

5.1 X-ray photoelectron spectroscopy is used extensively for the surface analysis of materials. Elements (with the exception of hydrogen and helium) are identified from comparisons of the binding energies determined from photoelectron spectra with tabulated values. Information on chemical state can...

ASTM E853-25 - Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
February 1, 2025 - ASTM International

3.1 The objectives of a reactor vessel surveillance program are twofold. The first requirement of the program is to monitor changes in the fracture toughness properties of ferritic materials in the reactor vessel beltline region resulting from exposure to neutron irradiation and the thermal...

Advertisement