loading
CEI EN 50708-3-1 - Power transformers - Additional European requirements Part 3-1 Large power transformer - General requirements
January 1, 2021 - CEI

The scope of this document is to define performance requirements of Large Power Transformers in compliance with EN 50708-1-1:2020. NOTE This document covers the transformers under Commission Regulation (EU) No 548/2014 of 21 May 2014 and its amendment No 2019/1783 of 1 October 2019,...

DS/EN 50708-3-1 - Power transformers – Additional European requirements: Part 3-1 Large power transformer – General requirements
May 25, 2020 - DS

The scope of this document is to define performance requirements of Large Power Transformers in compliance with EN 50708-1-1:2020. NOTE - This document covers the transformers under Commission Regulation (EU) No 548/2014 of 21 May 2014 and its amendment No 2019/1783 of 1 October 2019,...

DSF/PREN 50708-3-1 - Power transformers – Additional European requirements: Part 3-1 Large power transformer
DS

The scope of this document is to define performance requirements of Large Power Transformers in compliance with prEN 50708 1 1:2019. NOTE - This document covers the transformers under the EU Regulation N. 548/2014 and Amendment of 2019, gives additional specific guidance for single...

DSF/PREN 50708-2-4 - Power transformers – Additional European requirements – Part 2-4: Medium power transformer – Special tests
DS

This document describes the special test for Medium Power Transformers ≤ 3150kVA compliant with the EN 50708 2 series: - for corrugated tank liquid immersed transformers; - for the method of measurement of losses for one winding in Highest Voltage (HV) and 2 windings in Lowest Voltage...

CEI EN 50708-2-1 - Power transformers - Additional European requirements Part 2-1 Medium power transformer - General requirements
January 1, 2021 - CEI

The scope of this document is to define the energy performance of Medium Power Transformers in compliance with EN 50708-1-1:2020.

DSF/PREN 50708-2-1 - Power transformers – Additional European requirements: Part 2-1 Medium power transformer
DS

The scope of this document is to define the energy performance of Medium Power Transformers in compliance with prEN 50708-1-1:2019.

DSF/PREN 50708-2-5 - Power transformers – Additional European requirements – Part 2-5: Medium power transformer – Single phase
DS

The scope of this document is to define the energy performance of liquid immersed single-phase Medium Power Transformers in compliance with EN 50708 1 1:2020.

DSF/PREN 50708-2-3 - Power transformers – Additional European requirements – Part 2-3: Medium power transformer – Accessories
DS

This document describes lists of typical accessories used for liquid and dry type Medium Power Transformers (≤3150kVA). It defines the interface between the transformer's terminals, including cable boxes, and the power grid.

DSF/PREN 50708-3-4 - Power transformers – Additional European requirements – Part 3-4: Large power transformer – Special tests for corrugated tank and radiators
DS

This document describes a special test for hermetically sealed transformers with integral filling equipped with corrugated tank or tank with expandable radiators for Large Power Transformers > 3 150 kVA.

DSF/PREN 50708-2-6 - Power transformers – Additional European requirements: Part 2-6 Medium power transformers – Non conventional technologies
DS

The scope of this document is to define the energy performance of non-conventional technology Medium Power Transformers in compliance with EN 50708 1 1:2020.

DSF/PREN 50708-1-1 - Power transformers – Additional European requirements: Part 1 Common part
DS

This document is part of the of the EN 50708 series which applies to transformers in compliance with EN 60076 1.

MIL-T-48319 - TRANSFORMER
NPFC
A description is not available for this item.
Advertisement