The requirements specified in this Standard cover light-emitting diode (LED) equipment that is an integral part of a luminaire or other lighting equipment and that operates in the visible light spectrum between 400 and 700 nm. These requirements also cover the component...
Gives preferred terms, their definitions and symbols for organic light emitting diode (OLED) displays; with the object of using the same terminology when publications are prepared in different countries.
IEC 62341-5:2009 defines testing methods for evaluating environmental endurance of organic light emitting diode display modules (OLED display modules) for use and storage under the assumed usage environment.
IEC 62341-1-1:2009 is a generic specification for organic light emitting diode (OLED) displays. It defines general procedures for quality assessment to be used in the IECQ System and establishes general rules for methods of electrical and optical measurements, environmental and...
This part of IEC 62341 specifies the standard measurement conditions and measuring methods for determining optical and electro-optical parameters of organic light emitting diode (OLED) display modules, and where specified, OLED display panels, in the following areas: a)...
This part of IEC 62899 specifies the combined mechanical and environmental stress test methods for flexible OLED (organic light emitting diode) elements fabricated using the printing method. Mechanical stress tests include the static and cycling vending test, and the dynamic...
This part of IEC 62899 specifies the quality assessment methods, especially the mechanical stress test methods, for reliability assessment This document is applicable to flexible OLED elements formed on flexible substrates by printed electronics technology excluding those OLED products, which are...
This part 12 of IEC 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of...
IEC 60079-35-2:2011 details those performance and other safety features of caplights, including those with a point of connection for another equipment, not covered in IEC 60079-35-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for...
This International Standard establishes general rules for assigning particular meanings to certain visual, acoustic and tactile indications in order to - increase the safety of persons, property and/or the environment through the safe monitoring and control of the equipment or process; - facilitate...
This International Standard establishes general rules for assigning particular meanings to certain visual, acoustic and tactile indications in order to - increase the safety of persons, property and/or the environment through the safe monitoring and control of the equipment or process; - facilitate...
These requirements cover permanently installed devices, hereafter referred to as dimmers, that employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer, electronic ballast, self-ballasted lamp, tungsten-filament type, or...