3.1 This practice is intended to provide a method to calibrate moisture analyzers used on-stream or in the laboratory.
3.1 This practice is intended to provide a method to calibrate moisture analyzers used on-stream or in the laboratory.
This practice is intended to provide a method to calibrate moisture analyzers used on-stream or in the laboratory.
This practice covers a calibration technique based on the preparation of standards of known water content. This technique is applicable to the production of standards between 20 cm3/m3 and 2000 cm3/m3 water. The values stated in SI units are to be regarded as standard. Exception-The values given in...
1.1 This practice covers sample-handling and conditioning systems for typical pipeline monitoring instrumentation (gas chromatographs, moisture analyzers, and so forth). The selection of the sample-handling and conditioning system depends upon the operating conditions and stream...
Poor cross-machine direction (CD) moisture profiles result in non-uniform paper end-use properties, converting problems, and poor runnability in the form of wrinkles and breaks. Fiber costs (such as heavy edges) and energy consumption can be higher than when moisture is more uniform....
1.1 Procedure A-This guide describes the process and objective of formulating the mathematical relationship between the density system count of a nuclear surface moisture and density gauge and the corresponding wet density value of the density standard upon which the density system response...
This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the "density count") of a nuclear surface moisture and density gauge and...
1.1 This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the "density count") of a nuclear surface moisture and density gauge...
This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the "density count") of a nuclear surface moisture and density gauge and...
1.1 This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the "density count") of a nuclear surface moisture and density gauge...
1.1 This guide describes the process and objective of calibrating the density system of a nuclear surface moisture and density gauge, or formulating the mathematical relationship between the density system response (the "density count") of a nuclear surface moisture and density gauge...
This European Standard describes the method of determining the total moisture content of a sample of solid biofuels by drying in an oven and should be used when high precision of the determination of moisture content is necessary. The method described in this document is applicable to...
The unbiased autoclave test is performed to evaluate the moisture resistance integrity of non-hermetic packaged solid-state devices using moisture condensing or moisture saturated steam environments. It is a highly accelerated test which employs conditions of pressure, humidity...
For each species to be tested, preparation of samples of different moisture content, determination of their moisture contents by a reference method and measurement with the meter to be checked.
This standard specifies the equations to be used in a simulation method for calculating the non steady transfer of heat and moisture through building structures. It also provides a benchmark example intended to be used for validating a simulation method claiming conformity with this...
This standard describes test methods recommended for the evaluation of moisture vapour transmission rate of permeable film primary wound dressings.
Preparation of test samples of a range of cereals with different moisture contents and determination of moisture content by a meter and by a reference method.
This European Standard specifies a method for the determination of moisture in an analysis sample by drying the sample in an oven. This method is suitable for use for general analysis samples in accordance with CEN/TS 15414-1. It is applicable to all solid recovered fuels. NOTE 1 - The term...
This European Standard specifies the method for the determination of the Moisture Condition Value (MCV) of mixtures. The moisture condition value test determines the suitability of a mixture for placing, compaction and trafficking by construction equipment. The standard is applicable...