3.1 These terms have application to forensic practice. 3.1.1 For ASTM International standards, the standard designation is followed by a dash and a two-digit year designation in bold type, for example, E2161?-?19. The year citation references the year of publication of the standard from which the...
3.1 Commercially available computer material management programs are being used regularly in the rubber industry. These programs typically will retrieve information from a raw material or compounding material data base by chemical name, CAS registry number, trade name, and supplier...
1.1 This practice stipulates the types, names, and sizes of Codes for those material types specified in Table 1. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are likely not to be exact equivalents;...
This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture products...
1.1 This is a compilation of terms commonly used in analytical chemistry for metals, ores, and related materials. Terms that are generally understood or defined adequately in other readily available sources are either not included or their sources are identified. 1.2 A definition is a single...
5.1 Because of its simplicity and accuracy, the polarization resistance technique has been widely used in the laboratory in numerous metal/electrolyte systems (2, 7-10). However, its application in real-size elements is not straightforward because of the need for referral to the actual polarized...
5.1 Fracture mirror size analysis is a powerful tool for analyzing glass and ceramic fractures. Fracture mirrors are tell-tale fractographic markings in brittle materials that surround a fracture origin as discussed in Practices C1256 and C1322. Fig. 1 shows a schematic with key features identified...
3.1 As businesses and industries continue to expand globally, understanding unique consumer behavior and preferences across countries, regions, or cultures is critical for success. Implementing best practices, to design research and collect data and insights within and across countries or cultures,...
3.1 Definitions in this standard are to be regarded as the correct ones for terms found in other ASTM standards of Committee D18. Certain terms may be found in more than one standard issued under the jurisdiction of this committee and many of these terms have been placed in this standard. 3.2 Terms...
1.1 This terminology covers definitions of technical terms used in the plastics industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee D20 is responsible it is included...
5.1 As part of the VE/VA study, perform function analysis after the collection of relevant information and prior to the identification of alternatives. 5.2 This practice provides a specific understanding of what must be accomplished and provides the basis for stimulating the creative phase of the...
1.1 This terminology is a compilation of definitions of technical terms used in the cannabis industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee D37 is responsible it...
This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting...
This specification covers the standard requirements for iron wire with Class A, Class B, and Class C zinc coatings suitable for use in telephone, telegraph, and signal transmission lines. The zinc used for the coatings shall be of any grade while the base metal shall be made by any...
4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and manufacturers of a connected consumer product, with assistance from conformity...
5.1 The descriptive information required in this practice can be used to describe a soil to aid in the evaluation of its significant properties for engineering use. 5.2 The descriptive information required in this practice may be used to supplement the classification of a soil as determined by Test...
1.1 This test method covers procedures for the preparation, curing, transporting and testing of cylindrical test specimens of controlled low strength material (CLSM) for the determination of compressive strength. 1.2 This test method covers CLSM materials that have a higher strength than the soil...
3.1 This test replicates in the laboratory the corrosive actions of a film containing hygroscopic chlorides and solid material (mud) on electroplated chromium. The test's reactive media, the test slurry, was developed to simulate the film found on electroplated chromium deposits during a winter in...
1.1 This is a compilation of terms commonly used in analytical chemistry for metals, ores, and related materials. Terms that are generally understood or defined adequately in other readily available sources are either not included or their sources are identified. 1.2 A definition is a single...
This practice deals with the terms, parameters, symbols, units, and relationships used in liquid column chromatography. Most of the terms covered herein should also apply to other kinds of liquid chromatography, notably planar chromatography such as paper or thin-layer chromatography. These terms...