1.1 This practice is intended to serve as a concise, authoritative, and technically sound practice for building enclosure commissioning (BECx) that establishes two levels of BECx: fundamental and enhanced (refer also to Section 4). 1.2 The BECx process as defined in this practice includes the...
5.1 This test method provides a means to determine various fire-test-response characteristics, including the time to sustained flaming and the heat release rate, of composites exposed to a prescribed initial test heat flux in the cone calorimeter apparatus, after they have been vandalized in a...
1.1 This is a fire-test-response guide. 1.2 This guide is intended to provide guidance for the selection of test methods that are applicable to determining fire-test-response characteristics of upholstered furniture items contained within a detention cell. 1.3 This guide is intended for use by...
1.1 This is a fire-test-response standard. 1.2 This test method covers a means of measuring mass loss and fire behavior (and, optionally, smoke obscuration), from mattresses intended for detention or correctional facilities, by igniting the mattress, or mattress insert, with sheets of newspaper. 1...
1.1 This is a fire-test-response standard. 1.2 This test method provides a means of determining the burning behavior of stacking chairs used in public occupancies by measuring specific fire-test responses when a stack of chairs is subjected to a specified flaming ignition source under well...
4.1 This guide is intended for use by those undertaking the development of fire hazard assessments for upholstered seating furniture in health care occupancies. 4.2 As a guide this document provides information on an approach to development of a fire hazard assessment, but fixed procedures...
4.1 This guide is intended for use by those undertaking the development of fire hazard assessments for upholstered seating furniture in health care occupancies. 4.2 As a guide this document provides information on an approach to development of a fire hazard assessment, but fixed procedures...
5.1 Indoor CO2 concentrations have been used as indicators of IAQ for many years, involving both appropriate and inappropriate interpretations of indoor CO2 concentrations (1).5 Appropriate uses include estimating expected levels of occupant comfort in terms of human body odor perception, studying...
1.1 This practice provides a set of instructions for estimating the environmental load of residential water, as it is discharged from a residence. The environmental load is calculated based on the number and type of fixtures in the home, the common household chemicals used, and the number of people...
5.1 This guide provides recommendations for the enclosure commissioning process from its project planning through design, construction and occupancy and operation phases. This guide is intended for various building types. Although Practice E2813 defines two levels of enclosure commissioning,...
1.1 This guide covers the evaluation of hygrothermal impacts to existing roof enclosures resulting from roof enclosure alterations or changes to the interior environment. Examples of alterations that may affect the hygrothermal performance include but may not be limited to: installation of or...
4.1 This guide is intended for use by those undertaking the development of fire-hazard-assessme
1.1 This is a fire-test-response standard. 1.2 The purpose of this test method is to determine the burning behavior of upholstered furniture used in public occupancies, such as detention and correctional, behavioral, and other confinement facilities, when it has been vandalized to expose the...
1.1 This Standard covers flexible sprinkler hose with fittings intended for direct connection to fire sprinklers in installations requiring a flexible attachment to the sprinkler system piping such as clean rooms, suspended ceilings, and exhaust ducts. 1.2 The products covered by this Standard are...
1.1 This Standard covers flexible sprinkler hose with fittings intended for direct connection to fire sprinklers in installations requiring a flexible attachment to the sprinkler system piping such as clean rooms, suspended ceilings, and exhaust ducts. 1.2 The products covered by this Standard are...
1.1 This specification describes the recommended procedure for identifying the performance and operating requirements to be included in a purchase order for Traffic Monitoring Devices. As such, the specification can be referenced by the user and seller when determining compliance with each...
5.1 Indoor CO2 concentrations have been used as indicators of IAQ for many years, involving both appropriate and inappropriate interpretations of indoor CO2 concentrations (1).5 Appropriate uses include estimating expected levels of occupant comfort in terms of human body odor perception, studying...
1.1 This specification2 covers permanent metal railing systems (guard, stair, and ramp-rail systems) and rails (hand, wall, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. However,...
1.1 This practice is intended to serve as a concise, authoritative, and technically sound practice for Building Enclosure Commissioning (BECx) that establishes two levels of BECx: Fundamental and Enhanced (refer also to Section 4). 1.2 The BECx process as defined in this practice includes the...
1.1 This Standard covers requirements for corrosion control additives for fire sprinkler systems, such as corrosion inhibitors. 1.2 These solutions are intended for use in wet pipe sprinkler systems for installation in accordance with the manufacturer's design and installation instructions and the...
Narrow Your Results