loading
IEEE CABLE MODEMS - CABLE MODEMS: TECHNOLOGIES AND APPLICATIONS
IEEE
A description is not available for this item.
ASTM D6113-25 - Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
December 1, 2025 - ASTM International

5.1 This test method is used to determine the heat release rate and a number of other fire-test-response characteristics as a result of exposing insulating materials contained in electrical or optical cables to a prescribed initial test heat flux in the cone calorimeter apparatus. 5.2...

IEC 60794-1-2 REDLINE - Optical fibre cables – Part 1-2: Generic specification – Basic optical cable test procedures – General guidance
January 1, 2021 - IEC

This part of IEC 60794-1 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. An objective of this document is to define...

IEC 60794-1-2 - Optical fibre cables – Part 1-2: Generic specification – Basic optical cable test procedures – General guidance
January 1, 2021 - IEC

This part of IEC 60794-1 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. An objective of this document is to define...

DS/EN IEC 60794-1-2 - Optical fibre cables – Part 1-2: Generic specification – Basic optical cable test procedures – General guidance
March 1, 2021 - DS

This part of IEC 60794-1 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. An objective of this document is to define...

IEC 60794-1-21 - Optical fibre cables – Part 1-21: Generic specification – Basic optical cable test procedures – Mechanical test methods
March 1, 2020 - IEC

This part of IEC 60794 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The object of this standard is to define test...

CEI EN IEC 60794-1-23 - Optical fibre cables Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
May 1, 2020 - CEI

This part of IEC 60794 describes test procedures to be used in establishing uniform requirements for the geometrical, material, mechanical, environmental properties of optical fibre cable elements. This document applies to optical fibre cables for use with...

IEC 60794-4-30 - Optical fibre cables – Part 4-30: Aerial optical cables along electrical power lines – Family specification for optical phase conductor (OPPC) optical cables
April 1, 2021 - IEC

This part of IEC 60794, which is a family specification, specifies the optical fibre, cable elements, cable construction requirements, main requirements for installation and operating conditions, cable design characteristics and test for OPPC (optical phase...

DS/EN IEC 60794-1-23 - Optical fibre cables – Part 1-23: Generic specification – Basic optical cable test procedures – Cable element test methods
December 2, 2019 - DS

This part of IEC 60794 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The object of this part of IEC 60794 is to...

IEC 60794-1-23 - Optical fibre cables – Part 1-23: Generic specification – Basic optical cable test procedures – Cable element test methods
October 1, 2019 - IEC

This part of IEC 60794 describes test procedures to be used in establishing uniform requirements for the geometrical, material, mechanical, environmental properties of optical fibre cable elements. This document applies to optical fibre cables for use with...

IEC 60794-1-23 REDLINE - Optical fibre cables – Part 1-23: Generic specification – Basic optical cable test procedures – Cable element test methods
October 1, 2019 - IEC

This part of IEC 60794 describes test procedures to be used in establishing uniform requirements for the geometrical, material, mechanical, environmental properties of optical fibre cable elements. This document applies to optical fibre cables for use with...

DS/EN IEC 60794-4 - Optical fibre cables – Part 4: Sectional specification – Aerial optical cables along electrical power lines
August 28, 2018 - DS

Specifies the electrical, mechanical and optical requirements and test methods for aerial optical cables including OPGW (optical ground wire), OPPC (optical phase conductor), MASS (metalic aerial self-supported cable), ADSS (all-dielectric self-supporting...

CEI EN IEC 60794-4 - Optical fibre cables Part 4: Sectional specification - Aerial optical cables along electrical power lines
November 1, 2018 - CEI

This part of IEC 60794 covers cable construction, test methods, optical, mechanical, environmental and electrical performance requiremtnes for aerial optical fibre cables and cable elements which are intended to be used along power lines (OCEPL) as a high...

ASTM F2462-05(2026) - Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
June 1, 2026 - ASTM International

5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a...

CEI EN IEC 60794-1-22 - Optical fibre cables Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
May 1, 2018 - CEI

This part of IEC 60794 defines test procedures to be used in establishing uniform requirements for the environmental performance of • optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and • cables having a combination of...

CEI EN IEC 60794-1-31 - Optical fibre cables Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
January 1, 2019 - CEI

This part of IEC 60794, which is a generic specification, covers optical fibre ribbons. Requirements which are described in this part apply to optical fibre ribbon cables for use with telecommunication equipment and devices employing similar techniques, in particular...

IEC 60794-4 REDLINE - Optical fibre cables – Part 4: Sectional specification – Aerial optical cables along electrical power lines
June 1, 2018 - IEC

This part of IEC 60794 covers cable construction, test methods, optical, mechanical, environmental and electrical performance requirements for aerial optical fibre cables and cable elements which are intended to be used along power lines (OCEPL) as a high...

IEC 60794-4 - Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines
June 1, 2018 - IEC

This part of IEC 60794 covers cable construction, test methods, optical, mechanical, environmental and electrical performance requirements for aerial optical fibre cables and cable elements which are intended to be used along power lines (OCEPL) as a high...

ITU-T SUPP 39 SERIES L - Optical fibre cable Recommendations and standardization guideline
September 1, 2020 - ITU-T

This Supplement provides guidelines for establishing ITU-T L.100-series Recommendations on optical fibre cable. The Supplement covers roles and approaches on developing optical fibre cable Recommendations in ITU-T Study Group 15 under cooperation and harmonization with...

CEI EN IEC 60794-4-20 - Optical fibre cables Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables
February 1, 2019 - CEI

This part of IEC 60794-4, which is a family specification, covers optical telecommunication cables, commonly with single-mode fibres1 used primarily in overhead power lines applications. The cables can also be used in other overhead utility networks, such as for telephony or TV...

Advertisement