loading
DIN ISO 12240-4 - Spherical plain bearings - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998)
July 1, 1999 - DIN

This part of IS0 12240 specifies dimensions, tolerances and radial internal clearances for various dimension series of spherical plain bearing rod ends. The dimensions and tolerances specified in this part of IS0 12240 have been selected to permit the design and use of...

ISO 12240-4 - Spherical Plain Bearings - Part 4: Spherical Plain Bearing Rod Ends
August 15, 1998 - ISO

This part of ISO 12240 specifies dimensions, tolerances and radial internal clearances for various dimension series of spherical plain bearing rod ends. The dimensions and tolerances specified in this part of ISO 12240 have been selected to permit the design and...

ISO 8139 - Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
September 1, 2018 - ISO

This document specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1 000 kPa [10 bar1)] series cylinders manufactured in accordance with...

QPL-8948 - Bearing, Plain, Rod End, TFE Lined, Self-Aligning
April 12, 2021 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-B-8948 Bearing, Plain, Rod End, TFE Lined, Self-Aligning This QPL has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and...

DS/EN 6057 - Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank – Dimensions and loads, Inch series
November 2, 2020 - DS

This European standard specifies the characteristics of adjustable rod-ends consisting of: - a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265) - a rod end with internal threaded shank They are intended for use in fixed...

ASD-STAN PREN 6057 - Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank - Dimensions and loads, Inch series
June 1, 2019 - ASD-STAN

This European standard specifies the characteristics of adjustable rod-ends consisting of: - a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265) - a rod-end with internal threaded shank They are intended for use in fixed...

DS/EN 6055 - Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank – Dimensions and loads – Inch series
May 6, 2019 - DS

This European standard specifies the characteristics of adjustable rod-ends consisting of: - a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265); - a rod-end with threaded shank with an optional longitudinal groove for...

NAS661 - BEARINGS, BALL AND ROLLER, ROD END, ANTIFRICTION, AIRFRAME
June 28, 2019 - AIA/NAS

Scope. This specification establishes the requirements for airframe, anti-friction self-aligning, ball and roller bearing, rod ends.

DSF/FPREN 6057 - Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank – Dimensions and loads, Inch series
DS

This European standard specifies the characteristics of adjustable rod-ends consisting of: - a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265) - a rod end with internal threaded shank They are intended for use in fixed...

DSF/FPREN 6055 - Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank – Dimensions and loads – Inch series
DS

This European standard specifies the characteristics of adjustable rod ends consisting of: -- a spherical plain bearing, metal to metal, in corrosion resisting steel, wide series (EN 4265); -- a rod-end with threaded shank with an optional longitudinal groove for...

NAS469 - BEARING, BALL, SINGLE ROW, ROD END TYPE
February 28, 2013 - AIA/NAS
A description is not available for this item.
DS/EN 3541 - Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearance and loads
October 6, 1992 - DS

The standard specifies the characteristics of adjustable rod ends with self-aligning ball bearing and threaded shank.

BS 5983-5 - Metric Spherical Plain Bearings Part 5: Dimensions and Tolerances of Spherical Plain Bearing Rod Ends, Dimension Series E and JK
October 29, 1982 - BSI

Dimensions and tolerances for spherical plain bearing rod ends, dimension series E (cartridge design) and dimension series JK (integral design). Does not necessarily apply to rod ends for airframe applications.

AGS590-9 - AGS590 Rod End Bearing - Plain Shank
April 20, 1961 - SAE Industry Technologies Consortia

No scope available.

NAS432 - BEARING - BALL, DOUBLE ROW ROD END TYPE
AIA/NAS
A description is not available for this item.
QPL-8952 - BEARING, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
NPFC
A description is not available for this item.
NAS431 - BEARING - BALL, DOUBLE ROW ROD END TYPE
AIA/NAS
A description is not available for this item.
QPL-SAE-AS8952 - BEARING, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
NPFC
A description is not available for this item.
MIL-B-8952 - BEARING, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
NPFC
A description is not available for this item.
ASTM D953-19 - Standard Test Method for Pin-Bearing Strength of Plastics
November 1, 2019 - ASTM International

1.1 This test method covers the determination of the pin-bearing strength of rigid plastics in either sheet form, molded form, or in reinforced thermoset form. Procedures A and B are applicable for thermoplastic materials in tension loading and compression loading respectively. Procedure C...

Advertisement