loading
IPC-TM-650 2.6.11.1 - Hydrolytic Stability - Conformal Coating
July 1, 2000 - IPC

This test method is to determine the resistance of the applied conformal coating to reverting to liquid when exposed to high humidity at a specific temperature and time condition for each class. This test method is to evaluate the quality of the coated printed boards under storage...

AMS3137 - RESIN, CONFORMAL COATING, URETHANE
October 1, 1995 - SAE International
A description is not available for this item.
AMS3137A - RESIN, CONFORMAL, COATING, URETHANE
January 1, 1977 - SAE International

This specification covers a two-component system composed of a urethane resin and a hardener, supplied in kit form.

MIL-C-22627 - COATING, CONFORMAL, RESIN
NPFC
A description is not available for this item.
Handbook of Conformal Mappings and Applications
March 4, 2019 - CRC

The subject of conformal mappings is a major part of geometric function theory that gained prominence after the publication of the Riemann mapping theorem - for every simply connected domain of the extended complex plane there is a univalent and meromorphic function that maps such a domain...

AMS3137B - RESIN, CONFORMAL COATING, URETHANE ELASTOMER
August 9, 2011 - SAE International

This specification covers a two-component system composed of a non-polyester urethane resin and a hardener, supplied in kit form.

AMS3137D - Resin, Conformal Coating, Urethane Elastomer
June 1, 1994 - SAE International

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.

AMS3137C - RESIN, CONFORMAL COATING, URETHANE ELASTOMER
June 1, 1994 - SAE International

This specification covers a two-component system composed of a non-polyester urethane resin and a hardener, supplied in kit form.

MSFC-PROC-293 - COATING, CONFORMAL (POLYURETHANE), PRINTED CIRCUIT
NASA
A description is not available for this item.
IPC-TM-650 2.6.3.4 - Moisture and Insulation Resistance - Conformal Coating
July 1, 2003 - IPC

This test method is used to determine the moisture and insulation resistance of applied conformal coating under prescribed conditions of temperature and humidity. Raw material qualification testing is performed on designated comb patterns.

AMS59_047 - Conformal Coatings for Panels, Printed Circuit and Panels, Electronic Circuit
January 28, 2021 - SAE International

This SAE Standard defines the general requirements and provides a system for the control of quality for conformal coatings suitable for application to printed circuit assemblies.

ASTM D7120/D7120M-10(2017) - Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
January 1, 2017 - ASTM International

1.1 This guide covers the procedures for evaluating and preparing non-aggregate surfaced membranes for the application of a coating. It does not address design, construction, or installation issues regarding the roof assembly or the roof membrane. It is not an application guide...

IPC-HDBK-830 - Guidelines for Design, Selection and Application of Conformal Coatings
August 1, 2013 - IPC

Conformal coating, for the purpose of this document, is defined as a thin, transparent, polymeric coating that is applied to the surfaces of PCAs to provide protection from the end-use environment. Typical coating thickness ranges from 12.5 μm [0.49 mil] to 200 μm [7.9...

ASTM D7120/D7120M - Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
July 1, 2010 - ASTM

This guide covers the procedures for evaluating and preparing non-aggregate surfaced membranes for the application of a coating. It does not address design, construction, or installation issues regarding the roof assembly or the roof membrane. It is not an application guide for...

ASTM D7120/D7120M-10 - Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
July 1, 2010 - ASTM International

1.1 This guide covers the procedures for evaluating and preparing non-aggregate surfaced membranes for the application of a coating. It does not address design, construction, or installation issues regarding the roof assembly or the roof membrane. It is not an application guide...

DSCC-DWG-14002 - CAPACITOR, FIXED, TANTALUM, CHIP, CONFORMAL COATED CASE
February 3, 2015 - DOD

This drawing describes the complete requirements for tantalum chip capacitors.

MSFC-SPEC-393 - COMPOUND, PRINTED-CIRCUIT BOARD, CONFORMAL COATING
NASA
A description is not available for this item.
MSFC-PROC-257 - CONFORMAL COATING (EPOXY), APPLICATION OF, PROCEDU
NASA
A description is not available for this item.
ASTM D3805/D3805M - Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
May 1, 2016 - ASTM

This guide covers the application methods for Specification D2824/D2824M Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos, for application on asphalt built-up roof membranes, modified bitumen roof membranes, bituminous base flashings,...

ASTM D3805/D3805M-16 - Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
May 1, 2016 - ASTM International

1.1 This guide covers the application methods for Specification D2824/D2824M Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos, for application on asphalt built-up roof membranes, modified bitumen roof membranes, bituminous base...

Advertisement