loading
ASTM D5072-26 - Standard Test Method for Radon in Drinking Water
January 1, 2026 - ASTM International

5.1 Radon occurs naturally in ground water. Its longest-lived isotope is 222Rn, with a half-life of ~3.8 d. Radon in water can present a health risk through ingestion, but there is typically a greater risk from inhalation of the radon released from water into the air by showering and other...

ASTM D4869/D4869M-16a(2025) - Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
December 1, 2025 - ASTM International

This specification covers asphalt-saturated organic felt for use as an underlayment in steep slope roofing. The objective of this specification is to provide a finished product that will lie flat and resist wrinkling, puckering, and shrinking when left exposed to the sun, rain, frost, or dew for a...

ASTM D5378-24 - Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
November 1, 2024 - ASTM International

1.1 This specification covers the evaluation of specific performance characteristics of importance in woven and knitted shower curtains for use in institutional and household environments. 1.2 This specification may be used by mutual agreement between purchaser and supplier to establish...

ASTM D5378-12(2024) - Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
June 1, 2024 - ASTM International

1.1 This specification covers the evaluation of specific performance characteristics of importance in woven and knitted shower curtains for use in institutional and household environments. 1.2 This specification may be used by mutual agreement between purchaser and supplier to establish...

ASTM C1178/C1178M-24 - Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
May 1, 2024 - ASTM International

This specification covers coated glass mat water-resistant gypsum backing panel designed for use on ceilings and walls in bath and shower areas as a base for the application of ceramic or plastic tile. Coated glass mat water-resistant gypsum backing panel shall consist of a noncombustible...

ASTM F446-19(2023) - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
July 1, 2023 - ASTM International

1.1 This consumer safety specification covers performance requirements, test methods, and levels of performance to ensure satisfactory functioning of the grab bars and accessory items (not including plumbing controls) during reasonable use to assist a person entering, leaving, or moving within the...

ASTM F445-88(2023) - Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
July 1, 2023 - ASTM International

1.1 This consumer safety specification covers thermal-shock-preventing devices and systems delivering water to showering areas. 1.2 This specification establishes the minimum performance requirements for the devices and systems to minimize the risks associated with the hazards of thermal...

ASTM D3730-17(2022) - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
December 1, 2022 - ASTM International

1.1 This guide covers the selection and use of test methods for high-performance interior architectural wall coatings (HIPAC) that differ from more conventional coatings by being tougher, more stain-resistant, more abrasion-resistant and, ordinarily, designed to be applied to wall surfaces of...

ASTM D4551-22 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
September 1, 2022 - ASTM International

This specification covers poly(vinyl chloride) flexible sheeting which is used without mastic, bedding, or coating for construction of concealed water containment membranes that include fountains, pools, planters, shower and safe pans, tile tubs, or similar wet installations where the...

ASTM F1166-23 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
January 1, 2023 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

ASTM F1166-22 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
September 1, 2022 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

ASTM F1359/F1359M-22 - Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin
January 1, 2022 - ASTM International

1.1 This test method measures the ability of protective clothing or protective ensembles to resist liquid penetration in the form of a shower spray with surfactant-treated water. 1.2 This test method measures the liquid penetration resistance of the construction and configuration of the...

ASTM D4068-17(2022) - Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
March 15, 2022 - ASTM International

This specification covers flexible chlorinated polyethylene sheeting for use in concealed water-containment membranes in applications susceptible to costly secondary damage from leakage and which require very long term reliable performance, for example, fountains, pools, planters, shower and...

ASTM D8422-21 - Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
November 1, 2021 - ASTM International

1.1 This practice covers terminal point-of-use (POU) filters intended for intermittent use on showers, faucets, and other water use end-point devices that deliver hot and cold potable water. 1.2 This practice does not cover in-line filters. 1.3 Units-The values stated in inch-pound units are...

ASTM E2361-13(2021) - Standard Guide for Testing Leave-On Products Using In-Situ Methods
October 15, 2021 - ASTM International

4.1 The United States has concentrated attention and testing efforts on surgical scrubbing far more than on hand care in patient-to-patient routines. Great Britain, the originators of infection control nursing, have always had their focus on infection transmission. In the United States, published...

ASTM F1637-21 - Standard Practice for Safe Walking Surfaces
March 1, 2021 - ASTM International

4.1 This practice addresses elements along and in walkways including floors and walkway surfaces, sidewalks, short flight stairs, gratings, wheel stops, and speed bumps. Swimming pools, bath tubs, showers, natural walks, and unimproved paths are beyond the scope of this practice.

NSF 177 - Shower Filtration Systems - Aesthetic Effects
September 10, 2019 - NSF

The point-of-use shower filtration systems addressed by this Standard are designed to be used for the reduction of specific substances that may be present in potable water (public or private). Systems covered under this Standard are intended to reduce substances affecting the aesthetic...

DS/EN 14527 - Shower trays for domestic purposes
November 19, 2018 - DS

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy...

ASTM D4869/D4869M-16a(2021) - Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
January 1, 2021 - ASTM International

This specification covers asphalt-saturated organic felt for use as an underlayment in steep slope roofing. The objective of this specification is to provide a finished product that will lie flat and resist wrinkling, puckering, and shrinking when left exposed to the sun, rain, frost, or dew for a...

ASTM F1166-21 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
June 15, 2021 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

Advertisement