loading
ASTM F1184-23 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
February 15, 2023 - ASTM International

This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be...

ASTM F1184-23e1 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
February 15, 2023 - ASTM International

This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be...

AWWA C560 - Cast-Iron Slide Gates
January 29, 2014 - AWWA

This standard describes vertically mounted, cast-iron slide gates with full aperture closing, designed for either seating head, unseating head, or both, in ordinary water-supply and wastewater service. The gates are primarily used to shut off or throttle water or wastewater...

AWWA C562 - Fabricated Aluminum Slide Gates
June 8, 2014 - AWWA

This standard describes vertically mounted, fabricated aluminum slide gates with full-aperture closure, designed for either seating head or unseating head or both, in ordinary water supply and wastewater service. The gates are primarily used to shut off or throttle water or...

AWWA C563 - Fabricated Composite Slide Gates
June 8, 2014 - AWWA

This standard describes vertically mounted, fabricated, composite, resilientseated slide gates with full-aperture closure, designed for either seating head or unseating head or both, in ordinary water supply and wastewater service. The gates are primarily used to shut off or...

AWWA C561 - Fabricated Stainless-Steel Slide Gates
June 8, 2014 - AWWA

This standard describes vertically mounted, fabricated stainless-steel slide gates with full-aperture closure, designed for either seating head or unseating head or both, in ordinary water supply and wastewater service. The gates are primarily used to shut off or throttle water...

AWWA C542 - Electric Motor Actuators for Valves and Slide Gates
January 16, 2016 - AWWA

This standard describes electric motor actuators for valves and slide gates in water, wastewater, and reclaimed water utility systems. Electric motor actuators are designed to produce a multiturn rotary motion output to actuate a multiturn valve or gate or to actuate an...

ASTM F1184-16 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
January 1, 2016 - ASTM International

This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be...

ASTM F1184 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
January 1, 2016 - ASTM

This specification covers detailed requirements for cantilever and overhead slide chain link fence gates, gate posts, and accessories for industrial and commercial applications. The values stated in inch-pound units are to be regarded as standard. The values given in...

ASTM F1184-05(2010) - Standard Specification for Industrial and Commercial Horizontal Slide Gates
July 1, 2010 - ASTM International

This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be...

AWWA C541 - Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates
January 16, 2016 - AWWA

This standard describes hydraulic and pneumatic linear and quarter-turn actuators for operation of valves and slide gates in utility systems. Actuator types. Actuators described in this standard consist of the following types (Figure 1): 1. Linear actuators producing a linear...

AWWA C540 - Power-Actuating Devices for Valves and Slide Gates
June 16, 2002 - AWWA

This standard describes power-actuating devices for valves 3 in. (75 mm) in diameter and larger and slide gates in ordinary water service. Actuator types. Actuators described in this standard are divided into the following types: 1. Electric-motor type producing a multiturn rotary...

ASTM F1184-05 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
July 1, 2005 - ASTM International

This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be...

AWWA C513 - Open-Channel, Fabricated-Metal Slide Gates and Open-Channel, Fabricated-Metal Weir Gates
January 16, 2005 - AWWA

This standard covers open-channel, fabricated-metal slide gates and openchannel, fabricated-metal weir gates for water supply service. This standard also covers manual slide lift mechanisms and standard gate appurtenances. Power-driven actuators are specified in...

ASTM F1184-03 - Standard Specification for Industrial and Commercial Horizontal Slide Gates
January 10, 2003 - ASTM International

1.1 This specification covers detailed requirements for cantilever and overhead slide chain link fence gates, gate posts, and accessories for industrial and commercial applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given...

ASTM F1184-94(2000) - Standard Specification for Industrial and Commercial Horizontal Slide Gates
January 1, 2000 - ASTM International

1.1 This specification covers detailed requirements for cantilever and overhead slide chain link fence gates, gate posts, and accessories for industrial and commercial applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given...

ASTM C1548-02(2025) - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
August 1, 2025 - ASTM International

4.1 This test method is nondestructive and is commonly used for material characterization and development, design data generation, and quality control purposes. The test assumes that the properties of the specimen are perfectly isotropic, which may not be true for some refractory materials. The...

ASTM F2200-24 - Standard Specification for Automated Vehicular Gate Construction
April 15, 2024 - ASTM International

1.1 This specification defines performance-based and prescriptive-based methods of evaluating various classes of gates that are used for vehicular traffic and are to be automated. 1.2 Gate types addressed in this speci?cation include horizontal slide gates, horizontal...

ASTM F2611-23 - Standard Guide for Design and Construction of Chain Link Security Fencing
September 1, 2023 - ASTM International

This guide establishes the material selection, system design, and layout requirements, aas well as installation procedures for chain link security fence systems intended to substantially increase the difficulty to penetrate, thereby, increasing intrusion delay time. Selection criteria are provided...

ASTM F2373-24 - Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
December 15, 2024 - ASTM International

1.1 This consumer safety performance specification provides safety and performance requirements for various types of public use play equipment such as, but not limited to, composite play structures, climbing structures, to-fro swings, spring rocking equipment, and slides. It is intended to...

Advertisement