loading
AENOR UNE-EN ISO 16137 E - Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
January 24, 2007 - AENOR
A description is not available for this item.
AENOR UNE-EN ISO 21787 E - Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
January 10, 2007 - AENOR
A description is not available for this item.
AENOR UNE-EN ISO 16135 E - Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
January 3, 2007 - AENOR
A description is not available for this item.
AENOR UNE-EN ISO 16138 E - Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
January 3, 2007 - AENOR
A description is not available for this item.
AENOR UNE-EN ISO 16136 E - Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
January 3, 2007 - AENOR
A description is not available for this item.
AENOR UNE-EN ISO 16139 E - Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
January 3, 2007 - AENOR
A description is not available for this item.
DNVGL-ST-F119 - Thermoplastic composite pipes
September 1, 2019 - DNVGL

General This standard provides the design philosophy and requirements to specifications of loads and global analysis valid for TCPs. The standard applies to all newbuilt TCP systems and may be applied to the modification, operation and upgrading of existing pipelines and risers. Description of...

DIN EN ISO 306 - Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
March 1, 2014 - DIN

This International Standard specifies four methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials: - method A50 using a force of 10 N and a heating rate of 50 K/h; - method B50 using a force of 50 N and a heating rate of 50 K/h; - - method...

GMW15814 - Thermoplastic Elastomers - Polyolefinic, Partially Crosslinked
July 1, 2018 - GMW

Material Description. This specification covers the properties of black, general purpose, heat stabilized, thermoplastic vulcanizates containing partially crosslinked Ethylene-Propylene-Diene Monomer (EPDM) elastomer particles dispersed in a continuous Polypropylene (PP) matrix. These...

ASTM D5927-09 - Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
February 1, 2009 - ASTM International

This specification is intended to provide a callout system for thermoplastic polyester (TPES) injection and extrusion materials, both virgin and recycled, based on ISO test methods. However, the proportions of recycled material used, and the nature and amount of any...

ASTM D5927-03 - Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
March 10, 2003 - ASTM International

This specification is intended to provide a callout system for thermoplastic polyester (TPES) injection and extrusion materials, both virgin and recycled, based on ISO test methods. However, the proportions of recycled material used, and the nature and amount of any...

GMW16233 - Thermoplastic Elastomers - Styrenic, Exterior, Weatherable
May 1, 2019 - GMW

Material Description. This specification covers the properties of black, heat stabilized, weatherable thermoplastic elastomers consisting of Polypropylene (PP) and Styrene/Ethylene/Butylene/Styrene (SEBS) rubber for exterior applications. These materials can be processed by...

Advertisement