loading
ASTM C1943-24 - Standard Test Method for Grout Retention Properties of Ceramic Tile
February 1, 2024 - ASTM International

1.1 This test method covers the testing and evaluation of grout retention on glazed and unglazed ceramic tile surfaces and is intended to give the user a uniform procedure to make a comparative assessment of specific tile and grout systems. 1.2 The values stated in...

ISO 13007-3 - Ceramic tiles - Grouts and adhesives - Part 3: Terms, definitions and specifications for grouts
September 15, 2010 - ISO

This part of ISO 13007 defines terms concerning the products, working methods and application properties for ceramic tile grouts. It specifies values of performance requirements for all ceramic tile grouts [cementitious (CG) and reaction resin (RG) grouts]. This...

ISO 13007-6 - Ceramic tiles — Grouts and adhesives — Part 6: Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles
November 1, 2020 - ISO

This document applies to all bonded sheet waterproofing membranes that are used beneath ceramic tiling for internal and external tile installations on walls and floors. This document provides the terminology concerning the products and specifies the test methods and the values of...

ISO 13007-4 - Ceramic tiles - Grouts and adhesives - Part 4: Test methods for grouts
October 15, 2013 - ISO

This part of ISO 13007 describes methods for determining characteristics for grouts used in the installation of ceramic tiles. The following test methods are described: - determination of flexural and compressive strength (4.1); - determination of water absorption (4.2); -...

ISO 13007-1 - Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives
May 15, 2014 - ISO

This part of ISO 13007 applies to ceramic tile adhesives for internal and external tile installations on walls and floors. This part of ISO 13007 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives This part...

ASTM C1232-26 - Standard Terminology for Masonry
January 1, 2026 - ASTM International

1.1 This standard incorporates terms and definitions of terms used in standards under the jurisdiction of Committee C15 on Masonry - Manufactured Masonry Units, Mortars, and Grouts. 1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay...

ISO 13007-2 - Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives
November 1, 2013 - ISO

This part of ISO 13007 describes the methods for determining the characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: - determination of open time (4.1); - determination of slip (4.2); - determination of shear adhesion strength (4...

BS ISO 13007-4 - Ceramic tiles - Grouts and adhesives Part 4: Test methods for grouts
October 31, 2013 - BSI
A description is not available for this item.
ASTM C1232-25 - Standard Terminology for Masonry
June 1, 2025 - ASTM International

1.1 This standard incorporates terms and definitions of terms used in standards under the jurisdiction of Committee C15 on Masonry - Manufactured Masonry Units, Mortars, and Grouts. 1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay...

ASTM C395-24 - Standard Specification for Chemical-Resistant Resin Mortars
December 1, 2024 - ASTM International

1.1 This specification covers the requirements for chemical-resistant resin mortars for bonding chemical-resistant brick or tile. Mortars of this group generally have better physical properties and resist a wider variety of chemicals than inorganic mortars. For the use of these materials,...

BS ISO 13007-2 - Ceramic tiles - Grouts and adhesives Part 2: Test methods for adhesives
October 31, 2010 - BSI
A description is not available for this item.
ASTM C1232-24a - Standard Terminology for Masonry
December 1, 2024 - ASTM International

1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with manufactured masonry units and masonry constructed with manufactured masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and...

DS/EN 13888 - Grout for tiles - Requirements, evaluation of conformity, classification and designation
June 10, 2009 - DS

This European Standard applies to ceramic tile grouts for internal and external tile installations on walls and floors. This standard gives the terminology concerning the products, working methods, application properties, etc., for ceramic tile grouts. This...

ASTM C1232-24 - Standard Terminology for Masonry
June 15, 2024 - ASTM International

1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with manufactured masonry units and masonry constructed with manufactured masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and...

ASTM C307-23 - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
June 1, 2023 - ASTM International

1.1 This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets. These materials include mortars, brick and tile grouts, machinery grouts, and monolithic surfacings. These materials shall be based on resin,...

DS/EN 12808-2 - Grouts for tiles – Part 2: Determination of resistance to abrasion
November 7, 2008 - DS

This European Standard applies to all ceramic tile grouts used for internal and external tile installations on walls and floors. This European Standard specifies the test method to be used to determine the abrasion resistance of ceramic tile grouts. This European...

ASTM C580-18(2023) - Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
June 1, 2023 - ASTM International

1.1 This test method covers the determination of flexural strength and modulus of elasticity in flexure of cured chemical-resistant materials in the form of molded rectangular beams. These materials include mortars, brick and tile grouts, structural grouts, machinery...

Advertisement