Part of the ISA/O3neida series, this book discusses network systems in industrial automation and their features related to real-time and functional safety requirements. The basics of standard Ethernet are introduced, specifying the Open System Interconnection (OSI) reference model layers and...
1.1 This specification describes the required properties and test methods for a one or two-component, cold liquid-applied elastomeric-type membrane comprised of silyl-terminated polyether polymer, silyl-terminated polyurethane polymer, or a blend of the two polymers for waterproofing building decks...
5.1 Many petroleum products, and some non-petroleum materials, are used as lubricants, and the correct operation of the equipment depends upon the appropriate viscosity of the liquid being used. In addition, the viscosity of many petroleum fuels is important for the estimation of optimum...
5.1 This guide describes best practices to address characterization, storage, maintenance, and stabilization of microorganisms and the critical need for standardized and reliable methods in microbiology. 5.2 Proper preservation of microorganisms is fundamental to numerous scientific, industrial,...
1.1 This practice covers dosimetric procedures to be followed in installation qualification, operational qualification, performance qualification (IQ, OQ, PQ), and routine processing at electron beam facilities to ensure that the product has been treated with an acceptable range of absorbed doses....
1.1 In this guide, analysis methods are provided supporting the redistribution of aircraft functions between a human pilot and aircraft systems. Note 1: The analysis methods presented in this guide do not represent a means or method of compliance to any specific regulation. In this standard,...
4.1 This practice should be used in conjunction with a surface and subsurface site investigation to delineate a recommended field area that is adequate for any septic system that can reasonably be anticipated for the site. If actual design results in a smaller field area, the boundaries can be...
1.1 This practice covers software development, validation and verification practices for software that is part of an unmanned aircraft system (UAS), including its associated elements. It may also be used by third-party service providers, including UAS Traffic Management (UTM) service...
4.1 Geomembranes are used as impermeable barriers to prevent liquids from leaking from landfills, ponds, and other containment facilities. The liquids may contain contaminants that, if released, can cause damage to the environment. Leaking liquids can erode the subgrade, causing further damage....
4.1 Some level of risk of harm to health is inherent in all products or systems, including exoskeletons. However, safety (defined as "freedom from risk that is not tolerable") can be pursued by risk management techniques that entail systematic application of knowledge, experience, insight,...
5.1 The laboratory fatigue life determined by this standard for beam specimens has been used to estimate the fatigue life of asphalt mixture pavement layers under repeated traffic loading. Although the field performance of asphalt mixtures is impacted by many factors (traffic...
1.1 This specification describes the required properties and test methods for a one or two-component, cold liquid-applied elastomeric-type membrane comprised of silyl-terminated polyether polymer, silyl-terminated polyurethane polymer, or a blend of the two polymers for waterproofing building decks...
Narrow Your Results