Recommends standards and procedures for systems that reduce unintentional transmissions and prevent blocked frequencies that adversely affect two-way voice radio communications. This specification is applicable to ground-based, ground-mobile, and airborne two-way...
Sets forth goals and applications and recommends standards and procedures for systems that provide a means for reducing simultaneous transmissions that adversely affect two-way voice radio communications. This specification is applicable to ground-based, ground-mobile, and...
To recommend uniform format guidelines that can be used in the preparation of test reports submitted to the FCC and other relevant regulatory agencies, where such mobile two-way radio equipment test reports are intended to document compliance with relevant regulatory RF...
5.1 Concepts: 5.1.1 All TDEM/TEM instruments are based on the concept that a time-varying magnetic field generated by a change in the current flowing in a large loop on the ground will cause current to flow in the earth below it (Fig. 3). In the typical TDEM/TEM system, these earth-induced currents...
1.1 This standard is a framework-oriented guide for securing localized, broadcast-type Aircraft-to-Everythi
1.1 The purpose of this test method is to specify the apparatuses, procedures, and performance metrics necessary to quantitatively measure a robot's visual acuity as displayed to a remote operator or vision algorithm. The primary performance metric for this test method shall be a robot's possession...
This document is a supplement to SAE/USCAR 17 and is intended to give recommended usages for one and two-way RF connectors and dimensional requirements for 2-way RF connectors and hybrid (RF & DC power) connectors which are not currently specified elsewhere. The radio...
To recommend uniform format guidelines that can be used in the preparation of test reports submitted to the Federal Communications Commission and other relevant regulatory agencies, where such portable two-way radio equipment test reports are intended to document compliance...
4.1 The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability. 4.2...
4.1 These single-number ratings correlate in a general way with subjective impressions of sound transmission for speech, radio, television, and similar sources of noise in offices and buildings. This classification method is not appropriate for sound sources with spectra significantly...
4.1 The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability. 4.2...
5.1 Cast iron Yankee dryers can be up to 6.7 m [22 ft] in diameter, 7.3 m [24 ft] long, and weigh 91 000 Kg [100 tons], or more (refer to Fig. 1). Vessel thickness measurements are available from the paper/tissue machine operator. Cast iron is a brittle metal and has no specific yield point. Yankee...
4.1 The objective of this practice is to provide ergonomic design criteria for maritime vessels and structures to ensure that maritime systems and equipment are designed in compliance with requirements for human performance, human workload, health and safety, survivability, and habitability. 4.2...
This standard applies to: a) Apparatus or parts of apparatus in Class I, II, or III, Division 1 locations. Note 1: Section 500-8(B)(2) of the National Electrical Code (NEC), ANSI/NFPA 70, states that equipment that has been approved for a Division 1 location shall be permitted in a Division 2...
Narrow Your Results