loading
DS/EN IEC 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Common components – USB Type-C® Cable and Connector Specification
March 29, 2021 - DS

IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and...

CEI EN 62680-1-3 - Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
April 1, 2018 - CEI

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

DS/EN 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Universal Serial Bus interfaces – Common components – USB Type-CTM cable and connector specification
November 28, 2016 - DS

IEC 62680-1-3:2016(E) defines the USB Type-C™ receptacles, plug and cables. It defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following...

DIN EN 62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CTM cable and connector specification (IEC 62680-1-3:2016); English version EN 62680-1-3:2016
January 1, 2018 - DIN

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

IEC 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Common components – USB Type-C Cable and Connector Specification
February 1, 2021 - IEC

This specification is intended as a supplement to the existing USB 2.0, USB 3.2, USB4™ and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is...

CEI EN IEC 62680-1-3 - Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-C Cable and Connector Specification
January 1, 2019 - CEI

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

DSF/PREN 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Common components – USB Type-C® Cable and Connector Specification
DS

This specification is intended as a supplement to the existing USB 2.0, USB 3.2, USB4™ and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is...

UL 486D - Sealed Wire Connector Systems
November 30, 2023 - ULSE

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations and other installations such as: a)...

J1962_201607 - Diagnostic Connector
July 12, 2016 - SAE International

This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this...

J2863_202302 - Automotive Trailer Tow Connector
February 20, 2023 - SAE International

This SAE Standard provides the minimum requirements for automotive or RV, seven position, self-draining trailer tow connector interface. The procedures included within this specification are intended to cover the test methods, design, and performance requirements of the electrical interface...

ASTM B794-97(2026) - Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
February 1, 2026 - ASTM International

1.1 This test method covers the effects of repeated insertion and withdrawal of separable electrical connectors which are harmful to the electrical performance of the connector. 1.2 This test method is limited to electrical connectors designed for use in applications where the...

QPL-83867 - Connector, Oxygen Mask Hose, Non-Ejection Type
March 25, 2021 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-83867 Connector, Oxygen Mask Hose, Non-Ejection Type This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification adn such listing...

J3008_202307 - Sealed Trailer Tow Connector
July 19, 2023 - SAE International

This SAE Standard provides the auxiliary requirements for automotive or RV, additional 12 position, sealed Trailer Tow Connector Plug and Receptacle. The information included within this specification is intended to cover the test methods, design, and performance requirements of optional...

MIL-PRF-83867 - CONNECTOR, OXYGEN MASK HOSE, NON-EJECTION TYPE
September 26, 2007 - NPFC

This specification covers the non-ejection type mask hose connector assembly used in conjunction with the aviator oxygen mask or full-face fire fighter's mask.

QPL-19246 - Connector, Oxygen Mask Hose, Type MC-3A
June 18, 2019 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-DTL-19246 Connector, Oxygen Mask Hose, Type MC-3A This QPL has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and inclusion of a product...

ASTM E2820-13(2024) - Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
May 1, 2024 - ASTM International

5.1 A thermocouple connector, exposed to a temperature difference, contributes to the output of a thermocouple circuit. The output uncertainty allocated to the connector depends on the connector design and temperature gradient. 5.2 Connector performance can be classified...

Advertisement