This specification covers two types of aircraft glass window cleaners in the form of a ready-to-use liquid.
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. When traveling at a high rate of speed, as defined in the Side Closures Subsystem...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This test evaluates the glass wiping characteristics of door outer beltline...
This part of ISO 877 specifies a method for the direct exposure of plastics to solar radiation (method A) and a method for the exposure of plastics to glass-filtered solar radiation (exposure behind window glass) (method B). The purpose is to assess property changes produced...
1.1 This specification establishes requirements for composition, performance, and labeling of artists' pastels. 1.2 This specification includes requirements for identification and lightfastness. 1.3 Pastel specimens are exposed to both natural daylight through window glass and...
1.1 This standard describes procedures for the determination of the relative lightfastness and weatherability of printed matter under the following conditions, which involve exposure to natural daylight or accelerated procedures in the laboratory: 1.1.1 Method 1-Daylight behind window...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. To determine the potential for the door glass to be scratched as a result of...
5.1 This test method is a general procedure for testing architectural glass products under uniform static loads. 5.2 Loads on glass in windows, curtain walls, and doors may vary greatly in magnitude, direction, and duration. An understanding of wind loads on the building is...
This Standard specifies the direct weathering (method A) which is a method for the direct exposure of plastics to climatic environment including solar radiation, and the exposure behind window glass (method B) which is a method for the exposure of plastics to glass-filtered...
Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. To determine the dropping window system's glass stability and static...
ISO 877-2:2009 specifies a method for the direct exposure of plastics to solar radiation and a method for the exposure of plastics to glass-filtered solar radiation (exposure behind window glass). The purpose is to assess property changes produced after specified stages of such...
1.1 This practice is limited to the basic principles and procedures for operating a xenon arc lamp and water apparatus; on its own, it does not deliver a specific result. 1.2 It is intended to be used in conjunction with a practice or method that defines specific exposure conditions for an...
4.1 Radiation Shielding Window Components: 4.1.1 Radiation shielding window components operability and long-term integrity are concerns that originate during the design and fabrication sequences. Such concerns can only be addressed, or are most efficiently addressed, during one or the...
This part of ISO 877 specifies a method for the direct exposure of plastics to solar radiation (method A) and a method for the exposure of plastics to glass-filtered solar radiation (exposure behind window glass) (method B). The purpose is to assess property changes produced...
1.1 This specification covers glazing, glazed windows, glazed curtain walls, glazing panels in doors, other glazed protective systems, and non-attached window retrofit systems used in buildings that may be subjected to intentional or accidental explosions. 1.2 This specification...
4.1 This practice proposes considerations and methods of compliance for precipitation effects for Specification F3117/F3117M, Pilot Compartment View. 4.2 Plexiglass windows inherently provide an acceptable pilot view in case of precipitation in non-icing conditions without a coating and are...
Narrow Your Results