This document references:
ASME B16.11 - Forged Fittings, Socket-Welding and Threaded
Published by ASME
on
January 1, 2016
This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding and threaded, as illustrated in Tables 1 through 6 and Tables I-1...
This document references:
STD 598 - Valve Inspection and Testing
Published by API
on
February 1, 2023
This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (e.g., ceramic), and metal-to-metal-seated valves of...
This document references:
B16.10 - Face-to-Face and End-to-End Dimensions of Valves
Published by ASME
on
June 20, 2022
General Application. This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure...
This document references:
STD 598 - Valve Inspection and Testing
Published by API
on
February 1, 2023
This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (e.g., ceramic), and metal-to-metal-seated valves of...
This document references:
ASME B1.1 - Unified Inch Screw Threads (UN and UNR Thread Form)
Published by ASME
on
January 1, 2019
This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modules,...
This document references:
B16.10 - Face-to-Face and End-to-End Dimensions of Valves
Published by ASME
on
June 20, 2022
General Application. This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure...
This document references:
ASME B16.11 - Forged Fittings, Socket-Welding and Threaded
Published by ASME
on
January 1, 2016
This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding and threaded, as illustrated in Tables 1 through 6 and Tables I-1...
This document is referenced by:
API SPEC 6DSS - Specification for Subsea Pipeline Valves
Published by API
on
August 1, 2017
This specification defines the requirements for the design, manufacturing, quality control, assembly, testing, and documentation of ball, check, gate, plug, and axial on–off valves for application in...
This document is referenced by:
UFGS-33 51 15 - NATURAL-GAS / LIQUID PETROLEUM GAS DISTRIBUTION
Published by ARMY
on
November 1, 2008
NOTE: This guide specification covers the requirements for natural or manufactured gas distribution systems designed in accordance with ASME B31.8, or Liquified Petroleum Gas (LPG) Distribution...