This document references:
GMW14665 - Anodic Oxidation Coating on Aluminum
Published by GMW
on
December 1, 2019
This specification covers basic requirements for anodic coatings on aluminum and aluminum alloys. Material Description. The anodic coating is an oxide layer produced by an electrolytic oxidation...
This document references:
GMW16209 - Inorganic Coatings for Exterior Aluminum Trim Parts
Published by GMW
on
January 1, 2024
Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence....
This document references:
GMW14124 - Automotive Environmental Cycles
Published by GMW
on
July 1, 2022
Purpose. This procedure documents various environmental cycles and aging conditions that may be performed prior to testing or as a complete test. This specification does not include standard...
This document references:
GMW14270 - Material Engineering Common Requirements
Published by GMW
on
March 1, 2021
Purpose. The purpose of this specification is to clearly communicate the GM Materials Engineering requirements to the supplier during the quotation process. Each Statement of Requirement (SOR) for a...
This document references:
GMW14334 - Chemical Resistance to Fluids
Published by GMW
on
September 1, 2021
Purpose. The object of this test procedure is to determine the effects of fluids on automotive trim materials and components. Examples of fluids are cleaning agents, perspiration, etc. See Appendix...
This document references:
GMW14458 - Copper-Accelerated Acetic Acid Salt Spray (CASS) Test
Published by GMW
on
March 1, 2020
Purpose. The Copper-Accelerated Acetic Acid Salt Spray (CASS) test is typically used to evaluate the performance of decorative plating applied to metallic and non-metallic substrates. It has also...
This document references:
GMW14665 - Anodic Oxidation Coating on Aluminum
Published by GMW
on
December 1, 2019
This specification covers basic requirements for anodic coatings on aluminum and aluminum alloys. Material Description. The anodic coating is an oxide layer produced by an electrolytic oxidation...
This document references:
GMW16209 - Inorganic Coatings for Exterior Aluminum Trim Parts
Published by GMW
on
January 1, 2024
Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence....